Notifications
Clear all

FPP Backups

5 Posts
5 Users
0 Reactions
4,306 Views
Posts: 33
Topic starter
(@trudyandstephen)
Trusted Member
Joined: 6 years ago
[#54241]

I have made several .JSON backups of my FPP's. However, I was wondering if anyone has any experience or thoughts with cloning a FPP's SD card to make them swappable if one fails. I have 9 FPP's and would like to have a small case of multiple backup sd cards rather then going through the restore process during a show.


4 Replies
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Duplicating an SD card is not difficult. There are existing SD card tools that can be used to create and image from an existing SD card and then write that image to as many cards as needed.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

Image copying is a great idea, but I wouldn't put too much time into it now. FPP V5 is due out some time soon.


Reply
Posts: 36
(@rci27)
Trusted Member
Joined: 6 years ago

Yes - I have cloned my dives a few times. It feels so nice to be able to give an answer back to the forum! Here is what I do:

1. Get and open Win32DiskImager
2. For the image file, indicate where you want to save the image to
3. Change the "Device" to whatever drive is your source drive/card
4. Hit Read

It will take maybe 10-20 mins.

Once it is done you should have a single file which is now an image of your card.

To burn the image to a new card use Balena Etcher or something similar. There, you will indicate your source image file, and your target (blank) card. Takes about 2-5 minutes.

When it is complete you have an identical/bootable copy of the card.


Reply
Posts: 3
(@existattach)
New Member
Joined: 4 years ago
rci27 wrote:Yes - I have cloned my dives a few times. It feels so nice to be able to give an answer back to the forum! Here is what I do:

1. Get and open Win32DiskImager
2. For the image file, indicate where you want to save the image to
3. Change the "Device" to whatever drive is your source drive/card
4. Hit Read

It will take maybe 10-20 mins.

Once it is done you should have a single file which is now an image of your card.

To burn the image to a new card use Balena Etcher or something similar. There, you will indicate your source image file, and your target (blank) card. Takes about 2-5 minutes.

When it is complete you have an identical/bootable copy of the card. slope game

Great! I have tried and successfully copied my data.


Reply
Share: