The wlan0 option under Network configuration on my remote Falcon player appears to be missing. It was there before and working well. Then after a reboot it disappeared. Has anyone experienced this? Do I have a faulty Wifi adapter. Looking for ways to troubleshoot.
What firmware are you using. Pi BBB or ? Is wlan0 onboard or dongle. Is there a drop down arrow to right of elan0
FPP Version: v4.6.1
Platform: Raspberry Pi (Pi 3 Model B+)
FPP OS Build: v4.4
There were always two options. eth0 for ethernet and wlan0 for wireless. But now the wlan0 is missing from the box. There isn't a dropdown feature or any other way to view additional options. The box where it used to be only says eth0.
Also after logging into the FPP locally it states: "[FAILED] Failed to start FPPd" See systemct1 status fppd.service for details
In addition during startup I see [FAILED] Failed to start Configure Bluetooth Modems connected by UART
trudyandstephen wrote:In addition during startup I see [FAILED] Failed to start Configure Bluetooth Modems connected by UART
Assume you do not have a dongle plugged into a USB port, therefore thinking corrupt firmware, or damaged hardware.
First try removing any plug-in accessory any test with bare FPP....No camera, hdmi or anything in USB ports that is not file storage.
Then try doing a backup - reload latest FPP - restore FPP - test. May want to try a new microSD card too.
