Soldering station r...
 
Notifications
Clear all

Soldering station recommendations?

9 Posts
7 Users
0 Reactions
5,632 Views
Posts: 112
 fj
Topic starter
(@fj)
Estimable Member
Joined: 19 years ago
[#11010]

hi everyone,

i need to buy a soldering station. does anyone have any recommendations. i'd like it to be under $100.

there are a few on ebay but i'm just not sure about quality etc.
http://cgi.ebay.com.au/58W-Soldering-Iron-Station-Variable-Temperature-5-Tips_W0QQitemZ360250822490QQcmdZViewItemQQptZAU_B_I_Electrical_Test_Equipment?hash=item53e09f4f5a

the only thing that it would be used for is to solder together my christmas controllers, ssr's and portafloods.

also, what solder would be best to use? what composition and diameter? what size tip is best to use?

thanks, fj


8 Replies
g2ktcf
Posts: 3651
(@g2ktcf)
Famed Member
Joined: 18 years ago

get the CSI-2A station from Circuit Specialists. You cannot go wrong with this.


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

i would recommend this one http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=360228202727
It appears to be the same as the one g2ktcf has recommended.

I notice the store is out of stock but message him as waited until the last lot came in.

As for solder start with Tin/Lead (60%/40%) around the 0.8 to 1mm. The Flux is important, don't buy one with acid based flux. I usually buy "Multicore" brand solder but the stuff at Altronics is also OK.
Tip size comes down to personal preference, 1.0 to 1.6mm chisels are excellent for most components. a 4mm flat is helpful for terminal blocks. You can do the TB if a 1.2mm tip as long as you increase the temp and move the iron around the pad a bit.
I have the iron above with additional pencils with various tips already installed. that way I am not waiting for the iron to coll down before changing the tip.


Reply
Virtus
Posts: 1182
(@virtus)
Noble Member
Joined: 19 years ago

CSI -2A all the way. And buy three extra tips (conical, fine) now. You will need them after a couple dozen board builds.


Reply
Posts: 859
(@smartalec)
Prominent Member
Joined: 17 years ago

i got the LK937 soldering station off ebay, an brought 2 extra tips.
all i can say is it works great, the temp changed like instantly, when i change from circuit boards to soldering cable's together.
best i ever found on ebay.
ps. the LK is 'Lion King' brand.


Reply
Posts: 179
(@jcarney)
Estimable Member
Joined: 17 years ago

I started soldering 2 months ago just for christmas stuff and I followed the recomendation of others here and bought the CSI-2A station. I can't imagine it working any better.


Reply
Posts: 112
 fj
Topic starter
(@fj)
Estimable Member
Joined: 19 years ago

thanks for the recommendations.

cheers, fj


Reply
Posts: 987
(@wirewrap)
Noble Member
Joined: 18 years ago
smartalec wrote:
...
ps. the LK is 'Lion King' brand.

Are you sure it isn't "Little Known"??? 😀 😀 😀

🙂


Reply
Posts: 859
(@smartalec)
Prominent Member
Joined: 17 years ago
WireWrap wrote:Are you sure it isn't "Little Known"??? 😀 😀 😀
🙂

i did'nt even know what it stood for until i read the box..
it was a ebay buy, an now i can find it on ebay..lol
but i did find a link to it. http://creatroninc.com/product.php?ProductID=155
it works great, but after 3-4hr's the handle gets a little warm


Reply
Share: