Notifications
Clear all

Cheap Opto's

2 Posts
2 Users
0 Reactions
2,432 Views
Posts: 114
Topic starter
(@tabor)
Estimable Member
Joined: 18 years ago
[#6692]

Just wanted to let you guys know that Rockby are currently have optos on clearance for 10c a piece.

They are MOC8024 not the most ideal part but should work.
(Higher emitter current).

Any comments, on if they would work?

http://www.rockby.com.au/Rockby/Mailer/CL200309_2.htm


1 Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

Not on any of the coop boards that I'm aware of. There are a lot of different types of optos available, but only a few are relevant to the DIYC coop boards.

1) MOC3023 (and similar). These have triac output-sections, and are used in all of the SSRs that have been released so far that I know about.

2) H11AA1 (and similar). These have NPN transistor output sections and two opposing LEDs on the input section. These are used in all of the zero-crossing circuits that employ opto-couplers..

3) K84PH, used on the DC SSR board. These are similar to the opto-couplers in the Rockby sale, but are in a different package and their output sections lack the base lead connection that is present in the MOC8204 parts.

If and when I finalize the design of the AC/DC SSR these MOC8204 parts might be usable there (DC variant only), although I would prefer parts with a higher forward transfer ratio than the MOC8204. These parts have a single LED input and an NPN transistor output, and are generally not usable on any of the AC SSRs.


Reply
Share: