Enttec USB + 3ch De...
 
Notifications
Clear all

Enttec USB + 3ch Decoder = Random Blinking?

25 Posts
3 Users
0 Reactions
8,156 Views
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago

To be fair it sounds like you are dealing with off-brand DMX devices, the only thing I would trust is the Entecc dongle.

So the next step is to eliminate Vixen, grab some other software package that can drive the dongle and see if things change. Beyond that this is what a DMX packet looks like, so you can do some real scoping. I would scope w/o any devices connected and terminated.


Reply
Posts: 128
Topic starter
(@vadoo)
Estimable Member
Joined: 19 years ago

I'm not familiar with any other software. What would you recommend trying?


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago
Vadoo wrote:I'm not familiar with any other software. What would you recommend trying?

Your first post had this link which has lots of options.


Reply
Posts: 128
Topic starter
(@vadoo)
Estimable Member
Joined: 19 years ago

I notice that list. I was hoping for a recommendation of a good free one that would be easy to use, at least for testing purposes.


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago
Vadoo wrote:I notice that list. I was hoping for a recommendation of a good free one that would be easy to use, at least for testing purposes.

Why not use their example program on the right hand side of that page?


Reply
Page 4 / 5
Share: