On and off I've been working on a little pixel-controller project based on the fairly ubiquitous nRF24L01+ modules using the chip from Nordic. Currently I'm getting about 1.6Mb/s throughput when the chips are configured for an on-air data rate of 2Mb/s. This is good for 16 50-pixel WS2811 strings at a 50 Hz update rate.
The PIC that is used on the smaller board is a PIC16F1704. This is an interesting part because most of its peripheral functions can be assigned to almost any pin on the part (PPS=peripheral pin select), and because it has three configurable logic cells (CLC) which can be each be individually configured as several different types of gates or flip-flops. I'm making use of several different peripherals connected together to create the signals needed for the WS2811 pixels, freeing up CPU cycles for other things. The basic idea is that two of the PWM modules are gated together to create the WS2811 waveforms (and one is used as a clock for the UART in slave-synchronous mode), and another timer is also gated into the mix to ensure clean turn-off of the data stream (and clean turn-off of the clocks) at the end of each frame sent to the WS2811.
Very cool.
Very nice indeed!
Buddy
Do you have the wireless protocol documented?
Curious what sort of reliable range and rf spectrum usage you're seeing with this design. Some of us who've been tinkering with the Nordic stuff for the past few years have recorded significant range drops with higher OTA data rates as well as increased RF channel width.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
