Help create the F16...
 
Notifications
Clear all

Help create the F16v2 display interface

5 Posts
4 Users
0 Reactions
3,153 Views
dpitts
Posts: 1020
Topic starter
(@dpitts)
Noble Member
Joined: 16 years ago
[#36945]

The F16v2 is a new controller that is currently in the presale stage.
http://falconchristmas.com/shop/falcon-products/38-f16v2-beta-board.html

The new version will have a n OLED .96" 128x64 graphic display.
OLED Display

Similar to what we did on the Falcon Player (FPP) display a couple years ago, I am asking for your input to design the best possible user interface. So all you talented GUI experts this is your time to shine.

I have added 5 buttons to the controller (up, down, left, right and select).

Here are a few of my ideas.
1) Display IP Address and network info.
2) Display icons and small icon animations and/or text (think flip-phone graphics) to show vital information. E131 reception, lowest and highest universe number received. Etc.

The icons, format, menus, settings and all other GUI elements are open for discussion. I wish I had an easy way to make a mock-up that was web based so we can show and share ideas. Maybe Sean Meighan can help with that 🙂

Thanks.


4 Replies
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Take a look at the WiFi config screens for a wireless printer. You should have many of the same bits of information so that we can establish connectivity to the controller.


Reply
dpitts
Posts: 1020
Topic starter
(@dpitts)
Noble Member
Joined: 16 years ago

For now I am just going to display network information. Later we can add ability to change network settings. But because there are possibly 32 strings and each string can have a different configuration trying to set up the whole controller without a using a webpage would take a while with a display. I think using it for network information and status of controller is a good start. I was happily surprised to see display can be controlled with 8Mbits SPI signals. I may try 16Mbit next.

OLED

Reply
Posts: 853
(@roterhead)
Prominent Member
Joined: 15 years ago

You might consider the ability to quickly change networking on a new device. This could make it easier setup than ensuring your PC/Laptop is in the proper subnet etc to talk to a default IP?


Reply
Setarcos
Posts: 169
(@setarcos)
Estimable Member
Joined: 12 years ago
Roterhead wrote:You might consider the ability to quickly change networking on a new device. This could make it easier setup than ensuring your PC/Laptop is in the proper subnet etc to talk to a default IP?

+1

Having this as the default would certainly help one get up and running faster. Once the network is configured, the rest could be done with the web interface.


Reply
Share: