Wireless serial mod...
 
Notifications
Clear all

Wireless serial modem

52 Posts
17 Users
0 Reactions
18.2 K Views
Posts: 107
(@michael-sullivan)
Estimable Member
Joined: 19 years ago

Anything that means less cables then I am interested too.


Reply
FireGod
Posts: 655
Topic starter
(@firegod)
Honorable Member
Joined: 19 years ago

This will only do the RS 485. The zero cross still needs to be provided. I have not been following the other designs so I don't know about the other hardware.

This is what I was thinking, see the attached file.

FGWM485 R0

Reply
FireGod
Posts: 655
Topic starter
(@firegod)
Honorable Member
Joined: 19 years ago

The RS-232 boards are on their way to my house but I am in the desert in California. As soon as I get home I'll build and test one. If it works, I'll have about 25 to share to those that are TRULY serious about this. These will be needed to configure the Xbee modems.

I ordered the RS-485 boards today. If they work I'll have about 75 to share. These will be receivers only.

For proof that you are TRUELY serious, I'll need an emailed copy of your invoice from Mouser for the parts to build them before I send them in the mail.

Once I see they are working, I'll post the BOM for both boards.

Gezzz I hope they work!

FYI, I changed the RS-485 board so it will be able to supply 5VDC out of the RJ-45 jack for use in your other hardware. It will then be capable of running an FGI field module in a non-dimming mode.


Reply
rlilly
Posts: 993
(@rlilly)
Noble Member
Joined: 19 years ago
FireGod wrote:The RS-232 boards are on their way to my house but I am in the desert in California. As soon as I get home I'll build and test one. If it works, I'll have about 25 to share to those that are TRULY serious about this. These will be needed to configure the Xbee modems.

I ordered the RS-485 boards today. If they work I'll have about 75 to share. These will be receivers only.

For proof that you are TRUELY serious, I'll need an emailed copy of your invoice from Mouser for the parts to build them before I send them in the mail.

Once I see they are working, I'll post the BOM for both boards.

Gezzz I hope they work!

FYI, I changed the RS-485 board so it will be able to supply 5VDC out of the RJ-45 jack for use in your other hardware. It will then be capable of running an FGI field module in a non-dimming mode.

FG,
I would need both the transmitter and receiver. I'd take a couple of each. They should be able to front end a Renard-24. The ZC is on the board, so it should be ok. Let me know!

PS The CA desert is not that fun this time of year if you're working. Unless its the high desert. Good luck!


Reply
WWNF911
Posts: 1722
(@wwnf911)
Noble Member
Joined: 19 years ago

I'm afraid that the economy lately is putting the squeeze on my desires for new toys. I'm gonna have to pull out of this one Firegod. Sorry for any inconvenience.

Thanks

Leon


Reply
Page 6 / 11
Share: