Wireless serial mod...
 
Notifications
Clear all

Wireless serial modem

52 Posts
17 Users
0 Reactions
18.2 K Views
kmc123
Posts: 824
(@kmc123)
Prominent Member
Joined: 19 years ago

Firegod - Can you verify something for the Renards?
They are not individually addressable, they go in series and channel numbers are ordered by board position in the series.

Your diagram shows multiple Renards using one radio each - If they are all in range, how does the order go? Or does each one have to go on it's own com port?


Reply
FireGod
Posts: 655
Topic starter
(@firegod)
Honorable Member
Joined: 19 years ago
kmc123 wrote:Firegod - Can you verify something for the Renards?
They are not individually addressable, they go in series and channel numbers are ordered by board position in the series.

Your diagram shows multiple Renards using one radio each - If they are all in range, how does the order go? Or does each one have to go on it's own com port?

Each transmitting radio has to have it's own com port.

I have not played with the addressing of the Xbee or Zigbee but I think a new plugin for Vixen could be developed to transmit from one radio and send certain data to a certain receiver. I will not be the one to do this since my boards are addressable.

You might ask Phil Short to build a Renard Pic code with addressing but again it would need a plugin for Vixen to include the addressing.


Reply
rlilly
Posts: 993
(@rlilly)
Noble Member
Joined: 19 years ago

I'm going by memory as I'm outta town (and didn't pack any blank pcbs) but I believe you configure the Renards per serial port and can specifiy the channel number each port starts at.

You can all jump on me if I'm wrong.... I can take it...


Reply
kmc123
Posts: 824
(@kmc123)
Prominent Member
Joined: 19 years ago

Correct Bob, but what I was talking about showed 1 transmitter connected to a PC, and a receiver on each Renard. My question is how does each renard know what to do in this way? I don't think it will work. I was wondering if I was missing something...


Reply
FireGod
Posts: 655
Topic starter
(@firegod)
Honorable Member
Joined: 19 years ago
kmc123 wrote:..........what I was talking about showed 1 transmitter connected to a PC, and a receiver on each Renard.

Where did you see that? If it was in the Newsletter take a second look at the Renard setup. You will see each receiver has its own transmitter and com port.


Reply
Page 7 / 11
Share: