Just breaking a way from the thread on the 8 channel DMX ssr, how about a low voltage variant.. 12-48VDC input, for driving all the light string in NZ/Oz.. Everything we get is all low voltage anyway...
What your thoughts aussies / kiwis particually, as this will be of most use to all of you?
If there's an off-the-shelf (or off-the-web, as it were) output stage already designed, point me to it and I'll see if it might be possible to include footprints on the board to install either the triac or the low voltage output stage.
It might well be possible to do both... A low voltage option, is certainly going to meet the "safe" criteria better than mains potential projects.
If we are looking at low voltage output stages , what sort of current should they be able to handle?
Im figuring the 4-8amp triacs we are using are overkill for this. would say 200ma per channel be enough?
there are quite a few nice ssr's in a chip around. maybe one of these could be used.
Peter
mmmm..
decrease the voltage, and what goes up for a given load?? 200mA at 12V is just 2.4W.. thats going to be a bright show.. 10A minimum.
