Wireless serial mod...
 
Notifications
Clear all

Wireless serial modem

52 Posts
17 Users
0 Reactions
18.2 K Views
WWNF911
Posts: 1722
(@wwnf911)
Noble Member
Joined: 19 years ago
FireGod wrote:I thought there might be an advantage to a bare bones receiver only unit for the Renard users. See the attached pic. This takes $12 in parts, $32 for the Xbee Pro, and the 2" x 2" board.

It will only output an RS-485 data signal.

Would anyone be interested in this design?

Yes,... I would. 🙂


Reply
kmc123
Posts: 824
(@kmc123)
Prominent Member
Joined: 19 years ago

Count me in too!


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

It it will run a Ren 16 or Ren 24 across the yard (or on the roof) then count me in too!


Reply
grages
Posts: 259
(@grages)
Reputable Member
Joined: 19 years ago
FireGod wrote:I thought there might be an advantage to a bare bones receiver only unit for the Renard users. See the attached pic. This takes $12 in parts, $32 for the Xbee Pro, and the 2" x 2" board.

It will only output an RS-485 data signal.

Would anyone be interested in this design?

Very very nice FireGod. And yes very interested.

Shawn


Reply
rlilly
Posts: 993
(@rlilly)
Noble Member
Joined: 19 years ago
FireGod wrote:I thought there might be an advantage to a bare bones receiver only unit for the Renard users. See the attached pic. This takes $12 in parts, $32 for the Xbee Pro, and the 2" x 2" board.

It will only output an RS-485 data signal.

Would anyone be interested in this design?

My Hand Is Up!


Reply
Page 5 / 11
Share: