Wireless serial mod...
 
Notifications
Clear all

Wireless serial modem

52 Posts
17 Users
0 Reactions
18.2 K Views
Posts: 919
(@scorpia)
Noble Member
Joined: 19 years ago

FG,

from what im understanding your board is a simple RS232 - xbee board.
does this board do the same as your design?

check http://www.droids.it/data_sheets/990.006%20datasheet.pdf

might save some time

peter


Reply
omzig
Posts: 1603
(@omzig)
Noble Member
Joined: 19 years ago
scorpia wrote:FG,

from what im understanding your board is a simple RS232 - xbee board.
does this board do the same as your design?

check http://www.droids.it/data_sheets/990.006%20datasheet.pdf

might save some time

peter

Here are some prices: http://microcontrollershop.com/advanced_search_result.php?keywords=xbee+990&search_in_description=true&x=25&y=22


Reply
FireGod
Posts: 655
Topic starter
(@firegod)
Honorable Member
Joined: 19 years ago
scorpia wrote:ah yes the good old max232.

if you wanted a single power supply it might be worth checking some of the other max units. they have quite a few that run off 3.3v and some that dont even need external capacitors.

as an example
http://datasheets.maxim-ic.com/en/ds/MAX3233E-MAX3235E.pdf

not sure how they go cost wise but maybe worth thinking about.

This one costs $5.85, a little high


Reply
FireGod
Posts: 655
Topic starter
(@firegod)
Honorable Member
Joined: 19 years ago

I thought there might be an advantage to a bare bones receiver only unit for the Renard users. See the attached pic. This takes $12 in parts, $32 for the Xbee Pro, and the 2" x 2" board.

It will only output an RS-485 data signal.

Would anyone be interested in this design?

FG PC 485 R0

Reply
FireGod
Posts: 655
Topic starter
(@firegod)
Honorable Member
Joined: 19 years ago
Reply
Page 4 / 11
Share: