The Renard 64
 
Notifications
Clear all

The Renard 64

14 Posts
7 Users
0 Reactions
6,307 Views
RPM
Posts: 1080
 RPM
(@rpm)
Noble Member
Joined: 19 years ago
christmas-light wrote:Nice made :p

Is it posebile to get a copy of the design or the skematick :confused:

It is based on this design http://www.doityourselfchristmas.com/forums/dynamics/showentry.php?e=29&catid=26 as the "front end"
with SSR boards I designed specifically for this project.
I don't want to hijack the thread, so please PM if you would like more info.

Robert


Reply
Posts: 1041
(@christmas-light)
Noble Member
Joined: 18 years ago
RPM wrote:It is based on this design http://www.doityourselfchristmas.com/forums/dynamics/showentry.php?e=29&catid=26 as the "front end"
with SSR boards I designed specifically for this project.
I don't want to hijack the thread, so please PM if you would like more info.

Robert

Hi

Thanks 😉

C - L
Benjamin


Reply
Posts: 1065
Topic starter
(@olingerjccj)
Noble Member
Joined: 17 years ago
RPM wrote:It is based on this design http://www.doityourselfchristmas.com/forums/dynamics/showentry.php?e=29&catid=26 as the "front end"
with SSR boards I designed specifically for this project.
I don't want to hijack the thread, so please PM if you would like more info.

Robert

Feel free to hijack this one, Your Idea sounds cool. A 32 ch board would be nice too.

John


Reply
RPM
Posts: 1080
 RPM
(@rpm)
Noble Member
Joined: 19 years ago
olingerjccj wrote:Feel free to hijack this one, Your Idea sounds cool. A 32 ch board would be nice too.

John

In that case :rolleyes:

The SSR boards are 16 channels each, and are designed around the same LED driver IC's (Allegro A6279EA-T, but I also use the Maxim MAX6969) that the Grinch controller uses, and it uses my Grinch DMX dimming interface as the "front end".
These boards can be daisy chained for up to 64 channels (four 16 channel SSR boards). If you look closely at the pictures, you can see the Grinch interface board on the left of the enclosure, that's what the blue Cat5 cable is attached to.
My original intent was to have all of the boards mounted on a backboard in the garage, but later on I decided to put them in the box I used for my 14' MegaTree.
There are two of the 16 channel boards stacked on top of each other with 1" spacers.
I made the cords 5 feet long so I wouldn't have to use any other extensions; they are long enough to reach the plugs on my light strings with the box mounted on the "trunk" of the tree. We don't get snow here in CA, so I had to paint all of the boxes green to keep the "boss" happy 😉

I'll attach a few pictures.

SSR16 board
MegaTree 32Ch Controller
16 Channel Megatree Controller Box
Grinch DMX Dimmer V2
DMX 32 CHANNEL SSR INSIDE

Reply
Page 2 / 2
Share: