The Renard 64
 
Notifications
Clear all

The Renard 64

14 Posts
7 Users
0 Reactions
6,306 Views
Posts: 1065
Topic starter
(@olingerjccj)
Noble Member
Joined: 17 years ago
[#9530]

I was wondering is there were any plans to have a Renard 64 with solid state relays built in. Just curious.

Thanks
John


13 Replies
Posts: 345
 Trip
(@trip)
Reputable Member
Joined: 19 years ago

not that I know of, it's made for external SSRs. You could just mount the SSRs close to the main board if that's what you are wanting.


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

There probably isn't a large demand for a board that would require multiple feeds and have 64 cords coming out of it in one place. It would be a huge board to hold all of the components.


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Might not be able to LIFT it!

lol....


Reply
dnesci
Posts: 563
(@dnesci)
Honorable Member
Joined: 19 years ago

It has been discussed before, but the problem is the load it would put on the board traces. They would have to be massive to handle the current on the board.

From a practical stand point the on board ssr boards are used for display items that are clustered. Clustering 64 channels is a bit tough (outside of a Mega tree). The off board ssrs are better suited when the controller is dealing with a more dispersed display.

I use both the onboard for a mega tree, but use the Ren64s for the other items like arches, mini trees and candy canes. These items take out most of the yard.


Reply
Posts: 1065
Topic starter
(@olingerjccj)
Noble Member
Joined: 17 years ago
dirknerkle wrote:Might not be able to LIFT it!

lol....

Did not even think of the weight 😕 I will just stick with my plan on 3 more ren24.

John


Reply
RPM
Posts: 1080
 RPM
(@rpm)
Noble Member
Joined: 19 years ago
olingerjccj wrote:Did not even think of the weight 😕 I will just stick with my plan on 3 more ren24.

John

Yup... they can be heavy! I designed and built a 32 channel controller with on-board SSR's that I use on my MegaTree, and with 32 cords (at 5 foot long) it's a bit heavy. It would be much heavier at 64 channels, which would make it too hard to mount IMO.
This is one of two of these boxes I built. I built two 32 channel boxes because one 64 channel box would have been much to heavy to handle, even with shorter cords.

MegaTree 32Ch Controller

Reply
Posts: 1041
(@christmas-light)
Noble Member
Joined: 18 years ago
RPM wrote:Yup... they can be heavy! I designed and built a 32 channel controller with on-board SSR's that I use on my MegaTree, and with 32 cords (at 5 foot long) it's a bit heavy. It would be much heavier at 64 channels, which would make it too hard to mount IMO.
This is one of two of these boxes I built. I built two 32 channel boxes because one 64 channel box would have been much to heavy to handle, even with shorter cords.

Nice made :p

Is it posebile to get a copy of the design or the skematick :confused:


Reply
Posts: 1065
Topic starter
(@olingerjccj)
Noble Member
Joined: 17 years ago

Cool, I am planning for next year already. As for the mega tree for sure gonna build one next year. My plan is 3 colors at 8chs each color so the Renard24 will work fine. I will put the strobes on another Controller. I am almost tempted to tear down everything and build that for this year but would just a mega tree be enough no other lights. The mega trees look so nice and eye popping.

John


Reply
Posts: 345
 Trip
(@trip)
Reputable Member
Joined: 19 years ago

I have 2 ren 24s in one orbit box. Can't imagine anymore than that in one box. It was a nightmare to keep straight.


Reply
Page 1 / 2
Share: