G'day G'day,
I was reviewing the "Chasecicles" pdf document, and was quite interested in attempting to re-work my current icicles into ChaseCicles. However, I wasn't too happy/keen on the enclosures for the single channel SSR's. (Wrapped in plastic). We get enough snow/sleet/rain to make me uncomfortable with not having a "weather proof" solution.
Has anyone else taken a crack at this? Perhaps sliding the SSR inside a piece of PVC conduit, and then sealing the ends? Just wondering what others may have done first.
When I was first looking at doing chasecicles, I considered using plastic 35mm film cans for single channel enclosures.
I ended up, just using a Ren24 controller in a YBBS enclosure. The whole string was on one common neutral and I ran lamp cord out to feed two segments at a time. I used brush-on liquid electrical tape covered by heatshrink for the splices. Watch out if you do this as the brush-on stuff is highly flammable until it dries!



-Craig
Craig, the C9s are in J channel and the green circles are where the splice for the chasecicles are coming thru? Great idea, well done. The Ren 24 makes it easy. I'm thinking of using the SSR idea to down size wire and the amount of wire runs. I don't like the plastic bags either but I'm sure I'll find a spray on or brush on that will work with plastic bags. Brian P.S. LabRat maybe add "chasecicles" to title. I would have zoomed in on that rather than stumble into it because I am bored today.
Skunberg wrote:Craig, the C9s are in J channel and the green circles are where the splice for the chasecicles are coming thru? .
Yes, I drilled a small hole in the J channel and made the splice on the backside.
The J channel/C9 idea came from Toymakr000 on PC here.
-Craig
