At the moment I am toying with the idea of a one-channel controller based on some ideas that I had earlier for an RGB controller.
The basic idea is to use one of the PIC10F2xx parts, probably the smallest one (PIC10F200) to control (dim) one AC bulb (maybe a C9 bulb). The idea would be to daisy-chain a bunch of these boards together for the situation where people want to control some number of these types of lamps, perhaps spread out in a tree or or a fence or whatever. The input and output cables could be as simple as three wires (ground, signal, and combined power/zero-crossing signal. A single MOC3023 (no triac involved!) could be used to control one of these low-current lamps (or possibly an LED string). The PIC involved is pretty cheap (under $.50 or so), so this might be a way to put up a bunch of dispersed individual lamps.
The challenge at this point is writing the firmware (the plugin has already been written, and the hardware is pretty trivial), since these parts do not provide very many resources. So for right now it's pretty much a speculative thing, but I think that there are some circumstances where this sort of thing might be useful.
Missed this posting before, but I think some really neat things could be accomplished. It's always amazing to see how much functionality can be wrung out of a 10F...
P. Short wrote:the plugin has already been written, and the hardware is pretty trivial
Which plug-in is it?
don
Only one person besides myself has the hardware/firmware design, so I haven't released the plugin. The plugin that I wrote is based on an old version of the Renard plugin. I've heard somewhere or other that KC has made some changes to the Renard plugin (I don't know if this is released, or not), so I would need to revisit the implementation before I would send anything out.
