TERBObob wrote:So, why couldn't ya use something like these:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=250171424717&ssPageName=STRK:MEWA:IT&ih=015
And do our own PCB an chips ?
Not the same ?
Thats exactly what I'm going to do. Those LED's are the same ones that the current ShiftBrite design uses. I've ordered some samples from Allegro for that chip as well. Not figuring in the cost of the copper/etching, it's about $1.17 per "pixel". (using a base of 25-50 for pricing).
I'm planning on creating a circuit diagram this week, and some specs, and I'll get this rolling...
We need a forum for "DIY accessories", where all the misc boards and projects can be housed...
One thing I've noticed about the A6280 is that it is a 31 bit shift register...I think that makes it a bit more difficult to work with.(unless anybody has any easy ways around it not being divisible by 8).
ctmal wrote:One thing I've noticed about the A6280 is that it is a 31 bit shift register...I think that makes it a bit more difficult to work with.(unless anybody has any easy ways around it not being divisible by 8).
It's 32. 31 bits for the data, 1 bit for setting the current/PWM registers. It's exactly like the one that the ShiftBrite uses now- which I have a working plugin and code for. The web page reads goofy, because the A6281 says 32 bit, with 1 bit for the current/PWM registers. I've double checked this with allegro, and it's still 32 bits that you pass. Even if it was 31 bits that were being passed, it wouldn't be that much harder to code, since you shifting bit by bit serially anyways.
There's a significant difference between the (DIP) '80 and the QFN '81 chip which might affect your design.
The '81 has an in-built PWM oscillator. The '80 depends entirely on an external clock for both dimming and register loading. Using the '80 you need to generate a rock-solid clock signal all the time, not just when updating channel information.
That may or may not bring your drive computer to its knees, ala LedTricks.
Thats exactly what I'm going to do. Those LED's are the same ones that the current ShiftBrite design uses. I've ordered some samples from Allegro for that chip as well. Not figuring in the cost of the copper/etching, it's about $1.17 per "pixel". (using a base of 25-50 for pricing).I'm planning on creating a circuit diagram this week, and some specs, and I'll get this rolling...
We need a forum for "DIY accessories", where all the misc boards and projects can be housed...
😀
