TERBObob wrote:😉😀
😀 I still think $5.99 isn't bad for something done and shipped (in a QFN package, no fuss, etc..), BUT, since I've found the DIP, that's definitely more attractive. Now I can afford more than 10.
Once I get the design finalized, I'll share the info. I'll probably look at offloading some LEDs and Chips too, since I don't think I'll be needing a full 50 or 100.
JEC wrote:There's a significant difference between the (DIP) '80 and the QFN '81 chip which might affect your design.The '81 has an in-built PWM oscillator. The '80 depends entirely on an external clock for both dimming and register loading. Using the '80 you need to generate a rock-solid clock signal all the time, not just when updating channel information.
That may or may not bring your drive computer to its knees, ala LedTricks.
Interesting.
I suppose a driver board could be inserted at the beginning of the chain, between the PC and the first LED. The board would generate the clock and could also presumably offload some processing from the PC if we got creative enough.
NogginBoink wrote:Interesting.I suppose a driver board could be inserted at the beginning of the chain, between the PC and the first LED. The board would generate the clock and could also presumably offload some processing from the PC if we got creative enough.
Or a USB FIFO, then you don't have to program any parts.
...um...just a thought.
Tony M.
JEC wrote:There's a significant difference between the (DIP) '80 and the QFN '81 chip which might affect your design.The '81 has an in-built PWM oscillator. The '80 depends entirely on an external clock for both dimming and register loading. Using the '80 you need to generate a rock-solid clock signal all the time, not just when updating channel information.
That may or may not bring your drive computer to its knees, ala LedTricks.
This is very true, and I'm looking into some options for this. I haven't done much work with clock and timings, so if someone has some experience with this, please PM me, I have some ideas I'd like to discuss.
I've experienced PWM cycle mismatches even on the '81, when dimming multiple channels at once:
"
The A6281 generates its own internal PWM clock, which it uses to vary the intensity of the color. The clock default is 800KHz, which divided by 1024 is about 780 LED updates per second. The oscillators in each A6281 are free-running, there's no way to know at which point in a PWM cycle you will request a change in brightness. So if you're updating very rapidly, you'll end up jumping into a PWM cycle at random times, resulting in a slight brightness change.
"
So even in a perfect world, we'd want that clock to be there for reliability anyways.
Got some samples in this past week of the A6280. I also have a working example of controlling the DIP chip via a PIC16F628, but I'm working on converting it to another type that may be more suited for the routines and serial communication.
It looks like the project will just consist of serial communication to a Master PIC that can control a chain of these DIY ShiftBrites. Once I have a new working example, I'll post some schematics for review.
