TERBObob wrote:Seeing , is believing .;)I would also LOVE to see how bright these really are . ( in a vid )
Sorry , but after someone told me that I bought "junk" LED's , when they were the ones EVERYONE was ranting and raving about ... and yes , they DID indeed turn out to be JUNK , I am a bit skeptical on unproven claims .
Please realize that I'm not the one producing these. Just programming the Vixen plugin.
The videos are taken from a few inches away to show a closeup of the lense doing the color shifts. I purposely used a lower exposure as well so the video would not be washed out. When I filmed it the first few times, the blue and green always overexposed. I just finished testing of the plugin too, so I haven't had a chance to put them to work yet. In my testing, in a medium lit room, it projected nice colors on the walls from about 6 feet away. Probably within the next week I'll have some "practical" example videos.
Here's an example of a video I believe the maker of the ShiftBrite did:
Also, if you have 20 of these daisy chained, each one can be controlled individually, along with it's 3 color channels. So to control them individually, you just push out 32 * number in chain, bits. I'll have to post a video showing the control of 2 of these.
TERBObob wrote:
Ok ... I got the point that they have "billions" of colors ( which , is kinda hard to believe ) but ... so your saying that with three individual LED's that you could not accomplish the same thing ?
And correct me if I am wrong , but ... you do not have control individually , do you ? Like LEDTRIX ? These can only be daisy chained ?
I think it's about 16 million colors, but honestly, the perception of all of those colors would probably be impossible- unless you have super eye sight. In practical terms, I'd imagine around at least 200 well-defined colors (minus dimming variables).
As I said before, they are daisy chained- so you can connect them end-to-end, but they are all individually controllable. So Module 1 can have different dimming/color values than module 2, 3, etc...
Very cool. I'd love to play with these, but $5 each is too pricey for me currently. I'm sure they'd make a great show.
Unfortunately, the QFN packaging of the driver chip pretty much precludes creating a DIY version of this. 🙁
NogginBoink wrote:Very cool. I'd love to play with these, but $5 each is too pricey for me currently. I'm sure they'd make a great show.Unfortunately, the QFN packaging of the driver chip pretty much precludes creating a DIY version of this. 🙁
My thoughts exactly on the QFN package, thought I've started to look for either a PIC or another type of shift register to closely mimic this. The LED's aren't too pricey to make this work.
I just found that allegro makes a A6280 chip that comes in 16pin DIP. http://www.allegromicro.com/en/Products/Part_Numbers/6280/index.asp . I'm going to look into this today.
So, why couldn't ya use something like these:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=250171424717&ssPageName=STRK:MEWA:IT&ih=015
And do our own PCB an chips ?
Not the same ?
