ShiftBrite Developm...
 
Notifications
Clear all

ShiftBrite Development Update

53 Posts
14 Users
0 Reactions
21.7 K Views
Posts: 577
Topic starter
(@photovor)
Honorable Member
Joined: 19 years ago
Virtus wrote:This is a neat project. I am curious about why you wanted to send serial data out the parallel port. Was there something special about the parallel interface that made it a better choice for serial data in your project?

No Max232 chips, or spare PICs to play with... Kinda settled on the parallel port too, because it closely resembles the 595 boards- though each module acts as a 32-bit shift register, not 8.

I'm not sure that you'd gain anything else by going serial anyways- but that's just my opinion. Using a PIC, I know you could offload some CPU, but I was trying to make it as minimal as possible.


Reply
Posts: 854
(@terbobob)
Noble Member
Joined: 19 years ago

Sorry , I am like Phil ..
there are and HAVE been many falsely advertised LED's referencing their brightness and angle , and I am finding it VERY hard to believe that a single LED can produce as much brightness as a single white/clear floodlight can , and cover the same area .
And as far as bashing goes .. sorry , but when you get taken for LEDs that have "claims" of things that they are NOT ... a person gets a little skeptical when "claims" are being thrown around .
And the MCD's ... how many times have you read about someone buying ones that claimed to be BRIGHT , and after they got them ... WHAM .... no brighter than the one on the front of your PC to let you know your HD is rolling 🙄
Ok ... I got the point that they have "billions" of colors ( which , is kinda hard to believe ) but ... so your saying that with three individual LED's that you could not accomplish the same thing ?
And correct me if I am wrong , but ... you do not have control individually , do you ? Like LEDTRIX ? These can only be daisy chained ?

And one more thing . Ok , I viewed your little vids of a single tri LED doing blinky blinky , but ... what you are talking about .. sorry , but unless you ran that at less than 20 per cent , I don't see that doing no wall washing .
And ... how come you only show a single doing the blinky thing ... and not a muliple of them ?
Would be nicer to view a vid of them on a wall , in the dark and something to use for a distance reference to show how large/small of an area this covers .
I still say , whether it does a million colors or not , at $5.00 a pop for ONE led without any real proof of the claims , is VERY stiff in price .
How many mm's in size is this single LED anyway ? 5 ? 10 ? or smaller ? ( not talking the base/pcb )


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

After looking up some LEDS in the mouser catalog I am much less skeptical than before about the possibility that those pixels do as advertised (as far as brightness goes). And I have no doubt whatsoever that each LED can be individually controlled.


Reply
Posts: 854
(@terbobob)
Noble Member
Joined: 19 years ago
And I have no doubt whatsoever that each LED can be individually controlled.

Seeing , is believing .;)

I would also LOVE to see how bright these really are . ( in a vid )
Sorry , but after someone told me that I bought "junk" LED's , when they were the ones EVERYONE was ranting and raving about ... and yes , they DID indeed turn out to be JUNK , I am a bit skeptical on unproven claims .


Reply
A Marchini
Posts: 426
(@a-marchini)
Reputable Member
Joined: 19 years ago
Photovor wrote:No Max232 chips, or spare PICs to play with... Kinda settled on the parallel port too, because it closely resembles the 595 boards- though each module acts as a 32-bit shift register, not 8.

I'm not sure that you'd gain anything else by going serial anyways- but that's just my opinion. Using a PIC, I know you could offload some CPU, but I was trying to make it as minimal as possible.

You may have throughput issues at high speed using the parallel port. This may be a job for a USB FIFO.

Tony M.


Reply
Page 3 / 11
Share: