TERBObob wrote:Oh yeah .... I can see a chain of 100 of little boogers . ( and at $500.00 a pop/string ... yep , just right up my alley - cheap ... LOL )Why would anyone want these ??? Not feasible for light strings ...
nor , for a LEDTRIX .. ( even worse ... 700 of these at $5.00 a pop --- only $3500.00
They have quantity pricing.... $3.75 each for 100, and you could get them for under $2.50 for 700 (which I've gotten a quote for). Might want to do a little research before you go bashing everything about them. Heck, I've used RELAYS for my olsen board, because I didn't want to get into making that many SSRs this year, but for $5 for a small quantity for these modules, pretty nice. I'm not one to get in on expensive projects, but I can at least see the value in these.
This is a neat project. I am curious about why you wanted to send serial data out the parallel port. Was there something special about the parallel interface that made it a better choice for serial data in your project?
Just out of curiosity, do you have any of those modules (or seen them in person)? Not to bash any one vendor, but I'm very skeptical of any and all advertisements for LEDs. I just don't think that the people marketing them have any tendency to actually measure the light output, and numbers get thrown about with great abandon.
The reason that he is using the parallel port is that those chips require a clock and possibly strobe signal to go along with the data, very similar to the 595 chips (or the chips on the Grinch and LEDtriks, for that matter).
P. Short wrote:Just out of curiosity, do you have any of those modules (or seen them in person)? Not to bash any one vendor, but I'm very skeptical of any and all advertisements for LEDs. I just don't think that the people marketing them have any tendency to actually measure the light output, and numbers get thrown about with great abandon.
Yep, I have 2 right here, and they are VERY bright. The red, as usual is probably more like 6500 mcd. The 8K MCD figure is whats listed as the "maximum brightness" in the technical bulletin on the LED. Through sending the data, you can also send data to set the max current registers as well, so there's a ton of flexibility.
When you pulse all 3 colors at once, it's a pretty bright white, which would make a great strobe. I developed this plugin, and you're right- it's a chain of data bits and clock pulses, and then a latch.
It was a little tricky to learn how to do that, without any functions that already did it- like shiftOut. So I wrote everything from the ground up- in C# non the less. I have never used C# till tuesday.
