Renard Plus RGB Str...
 
Notifications
Clear all

[Closed] Renard Plus RGB Strip Controller

96 Posts
31 Users
0 Reactions
32.3 K Views
Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago
duramadmax wrote:I see you referenced a website "www.renard-plus.com"..is this for future use? I could not go to it

It is being setup now and should be available in the near future..


kidcole
Posts: 307
(@kidcole)
Reputable Member
Joined: 17 years ago

Has anybody discussed a fully contained "DC24" Renard ... a DC version of the SS24 ? Would be slick for 8 RGB strips or stings driven from a single board and power supply in CG-1500 case. Would only need 32 screw terminals instead of 48, and give good room in the case for a decnet sized power supply.


duramadmax
Posts: 904
(@duramadmax)
Noble Member
Joined: 16 years ago

Isn't that what we pretty much have already with a REN48 except it uses external power input, no transistors directly on board, and it is rated for less output. Maybe we need a REN48HD-LSD 🙂 (Heavy Duty)


jaywalk101
Posts: 761
(@jaywalk101)
Prominent Member
Joined: 15 years ago

Check out the 27 Channel DMX Controller that Ray Wu offers. I ran 8 mini trees using 4M of 30/Led 5050 RGB strip with this controller w/o any problems...

I've been following this thread though... I def like the idea of a 3 channel DCSSR.. can't wait to see the finished product!

kidcole wrote:Has anybody discussed a fully contained "DC24" Renard ... a DC version of the SS24 ? Would be slick for 8 RGB strips or stings driven from a single board and power supply in CG-1500 case. Would only need 32 screw terminals instead of 48, and give good room in the case for a decnet sized power supply.

Posts: 2171
(@mschell)
Noble Member
Joined: 18 years ago

While I like the idea of an RGB setup and a 3-channel external DCSSR, I have a minor issue with the idea of using RJ11s. It's bad enough having to find the right length RJ45-RJ45 cable. Now, to add this type of SSR, I need a whole new set of cables. Yes, I can make cables, I have a crimper, etc.... but wouldn't it be simpler to just put RJ45 jacks on both ends and just not use one of the wire pairs? That way you could continue to use the same cables as a 4-channel SSR.

Just a thought...


Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago
mschell wrote:While I like the idea of an RGB setup and a 3-channel external DCSSR, I have a minor issue with the idea of using RJ11s. It's bad enough having to find the right length RJ45-RJ45 cable. Now, to add this type of SSR, I need a whole new set of cables. Yes, I can make cables, I have a crimper, etc.... but wouldn't it be simpler to just put RJ45 jacks on both ends and just not use one of the wire pairs? That way you could continue to use the same cables as a 4-channel SSR.

Just a thought...

I am getting ready to change that, it only makes sense to do it that way!!!:thup:


kidcole
Posts: 307
(@kidcole)
Reputable Member
Joined: 17 years ago
jaywalk101 wrote:Check out the 27 Channel DMX Controller that Ray Wu offers. I ran 8 mini trees using 4M of 30/Led 5050 RGB strip with this controller w/o any problems...

I've been following this thread though... I def like the idea of a 3 channel DCSSR.. can't wait to see the finished product!

Yes, good suggestion. I am aware of that one and thinking of using a couple of them this year. But I also thought having the same capability as a Renard SS24 (in DC for RGB) would be nice for those who use all Renard. And of course not cost as much.

duramadmax - yes, need better load handling. Assuming a REN48HD-LSD would be a much larger board, then the 8-RGB version could have a much smaller footprint, and could fit nicely in a CG case with a power supply.


Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago

Please keep posts related to this threads topic.

Thanks
Mac


Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago
mschell wrote:While I like the idea of an RGB setup and a 3-channel external DCSSR, I have a minor issue with the idea of using RJ11s. It's bad enough having to find the right length RJ45-RJ45 cable. Now, to add this type of SSR, I need a whole new set of cables. Yes, I can make cables, I have a crimper, etc.... but wouldn't it be simpler to just put RJ45 jacks on both ends and just not use one of the wire pairs? That way you could continue to use the same cables as a 4-channel SSR.

Just a thought...

I have changed the connectors to RJ45's so they are common with other controllers and you can also use the standard 4 channel DCSSR and cat5 cables if you like.

BTW nothing is final at this point

Mac.

Renard Plus RGB DCSSRrj45
Renard Plus RGB Strip ControllerRJ45

g2ktcf
Posts: 3651
(@g2ktcf)
Famed Member
Joined: 18 years ago

Mac...I think that should do it....great job


Page 6 / 10
Share: