Powered Pixel Over ...
 
Notifications
Clear all

Powered Pixel Over Cat5 (PPOC5)

28 Posts
10 Users
0 Reactions
22 K Views
Posts: 672
(@pixelpuppy)
Honorable Member
Joined: 12 years ago
HEMISixty wrote:Not my first typo, probably not my last...

LOL I knew it was a typo, but since I was "being a little padandic" I had to point it out, didn't I? :naughty:

...just as long as you’re typing “config t” more than white papers...

Sadly, its the latter, not the former. I spent many years on the "config t" end of things but as one moves up the corporate ladder it forces one into more white papers 😥


Reply
HEMISixty
Posts: 66
(@hemisixty)
Trusted Member
Joined: 6 years ago
pixelpuppy wrote:LOL I knew it was a typo, but since I was "being a little padandic" I had to point it out, didn't I? :naughty:

Good point 🙂

pixelpuppy wrote: Sadly, its the latter, not the former. I spent many years on the "config t" end of things but as one moves up the corporate ladder it forces one into more white papers 😥

I quit climbing the ladder when I realized the sacrifices I was making were depriving me of more important things. I left after ten years and I’m much happier back in the console...good luck and try to have fun...

Sent from my iPhone using Tapatalk Pro


Reply
Posts: 672
(@pixelpuppy)
Honorable Member
Joined: 12 years ago
HEMISixty wrote:
I quit climbing the ladder when I realized the sacrifices I was making were depriving me of more important things. I left after ten years and I’m much happier back in the console...good luck and try to have fun...

Agreed. I definitely enjoyed working in the console much more than working in MS Word. The higher pay was nice, but there is a point where its not worth the sacrifices. That's why I retired early and never been happier. Now I just tech edit hobby manuals :biggrin2:


Reply
Posts: 186
(@steve123)
Estimable Member
Joined: 7 years ago

The output capacitors of the buck converter might be a problem. I cannot tell from the Kicad (Eagle?) rendering what the part is, perhaps you could post a schematic? From the looks of things they appear to be electrolytic caps. These will suffer reliability issues and have a short lifetime. If at all possible, try to replace these with ceramic caps. You will definitely need a buck controller that operates into the MHz to achieve that. It should reduce the size of the inductor as well.


Reply
Posts: 447
(@glycerine)
Honorable Member
Joined: 7 years ago

What ever happened with this?


Reply
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago

I used to power my AC LED's over Cat5. Anything's possible.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago
ngen33r wrote:This doesn't follow the traditional POE standard. I am using 6 conductors for power so I can source the buck with more amperage. Pins 5 & 6 I am using for differential data.

I don't think that you really meant Pins 5 & 6 for differential data - they don't constitute a twisted pair in Cat5 wiring.


Reply
ChiefWarrant
Posts: 570
(@chiefwarrant)
Honorable Member
Joined: 19 years ago
Glycerine wrote:What ever happened with this?

Kind of curious too. I happen to have a dozen or so Cisco 48VDC power bricks sitting in the garage that might com in use.....


Reply
Page 3 / 3
Share: