pixel project groun...
 
Notifications
Clear all

pixel project grounding question

5 Posts
3 Users
0 Reactions
3,085 Views
Posts: 2215
Topic starter
(@ctmal)
Famed Member
Joined: 19 years ago
[#55767]

I'm playing around with a pixel project, just for fun and some learning, but I just want to confirm the grounding before I plug anything in.
Here's the setup.

I have a esp32 D1 knockoff board that will be connected via USB to the computer and will be powered using the USB port(for now, anyway). The D1 board will only be supplying the pixels with the data signal. The pixels will be getting their voltage from an external powersupply.

Now, I think I know the answer but I want to confirm before I risk my computer. Should the ground on the D1 board be connected to the ground on the external power supply?

Full disclosure, I'm thinking yes. If I'm wrong, well, that's why I'm asking.

Thanks.


4 Replies
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Yes data and gnd from the D1 to the pixels .


Reply
Posts: 2215
Topic starter
(@ctmal)
Famed Member
Joined: 19 years ago
angus40 wrote:Yes data and gnd from the D1 to the pixels .

Thank you.


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Well. You are sort of correct. Data and V-(aka gnd) from the ESP should/(I say MUST) go to the first pixel. You can also tie it to the PSU but it is IMPORTANT that the pair of wires go from the ESP to the first pixel and it is a nice to have connection from the ESP to the PSU.


Reply
Posts: 2215
Topic starter
(@ctmal)
Famed Member
Joined: 19 years ago

Thanks all,
The good news is that the initial tests are working and nothing blew up...woohoo.


Reply
Share: