dpetryk wrote:Here is a 4 channel mini controller works with DMX and LOR protocols.No communications cables required.
Yeah, except it's five years old, there's no contact information, we've never heard of it since and the guy never answered anyone's questions (including those of our own Budude).
\dmc
dpetryk wrote:Here is a 4 channel mini controller works with DMX and LOR protocols.No communications cables required.
It's cool enough but we would need more information(build instructions/where to buy), and I doubt it's cheap...
2 cents Worth:
At one point years ago I was working on the idea of a small 1 channel board that would fit inside a candy cane. I wanted to put about 50 or so if these around the outside of my display. I found I could power the cane directly from the opto without a ssr or triac. each cane would report back to 595 type controller. I want to use Cat5 to run 7 canes on each run. The Problem that never got solved (before I stopped) was what connectors to use and how to interconnect the 7 canes on the cat5 line. The cost and size of the board mounted input/output cat5 connectors was an issue.
I would be very interested in revisiting this project. Someone in this thread talked about how model trains are controlled on their powered tracks. This would be great if we could design something addressable that could be inserted inside the cane (or whatever) on the AC power line. Then the canes could be daisy chained on a single power line that was plugged into a control injector or sorts. The injector would get its show commands from one port of a different existing controller or a new plug-in to the show software.
Going way out of the box .... could a ws2811 controller chip be used? If I understand how they work, they are self-addressing based on their position on the string. True they are low voltage but maybe there is a version of this chip what could be used on 120 volts AC.
I would like to use something along these lines for my come-back show in 2015.
I hope there are others that will help keep this idea alive!
Cburg
Cburg wrote:2 cents Worth:At one point years ago I was working on the idea of a small 1 channel board that would fit inside a candy cane. I wanted to put about 50 or so if these around the outside of my display. I found I could power the cane directly from the opto without a ssr or triac. each cane would report back to 595 type controller. I want to use Cat5 to run 7 canes on each run. The Problem that never got solved (before I stopped) was what connectors to use and how to interconnect the 7 canes on the cat5 line. The cost and size of the board mounted input/output cat5 connectors was an issue.
I would be very interested in revisiting this project. Someone in this thread talked about how model trains are controlled on their powered tracks. This would be great if we could design something addressable that could be inserted inside the cane (or whatever) on the AC power line. Then the canes could be daisy chained on a single power line that was plugged into a control injector or sorts. The injector would get its show commands from one port of a different existing controller or a new plug-in to the show software.
Going way out of the box .... could a ws2811 controller chip be used? If I understand how they work, they are self-addressing based on their position on the string. True they are low voltage but maybe there is a version of this chip what could be used on 120 volts AC.
I would like to use something along these lines for my come-back show in 2015.
I hope there are others that will help keep this idea alive!
Cburg
The train thing has isues data rate is really slow in the bps range and it misses a data fairly often(expected with motors on a data line...), your better off tossing a wireless transmitter at it and doing it that way cost wise.
Working on that kind of concept over here http://diychristmas.org/vb1/showthread.php?3331-Raptor-Prime .
kingofkya wrote:The train thing has isues data rate is really slow in the bps range and it misses a data fairly often(expected with motors on a data line...), your better off tossing a wireless transmitter at it and doing it that way cost wise.Working on that kind of concept over here http://diychristmas.org/vb1/showthread.php?3331-Raptor-Prime .
I will keep an eye on that tread too. I may also just revisit my old design. I do want the candy canes in the display for 2015. So I want to build what I can. In fact I am thinking of getting the local scout troop involved and teach them what end of a soldering iron to hold onto. .... I am sure it will be a fast lesson...
Cburg
