One-Channel Control...
 
Notifications
Clear all

One-Channel Controller

99 Posts
21 Users
0 Reactions
38.8 K Views
Posts: 2541
(@lightup)
Famed Member
Joined: 17 years ago
ukewarrior wrote:His DIYC handle is???

The guy in post #46?


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago
ukewarrior wrote:His DIYC handle is???

Blickensderfer


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Unfortunately,
His PM box is full !

Skunberg wrote:Blickensderfer

Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

I have a couple still laying around, here is the one I frankenstiened up to test with. LOL

ws board1

Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

If you guys want to make some, here are the gerber files. I talked to Dan, he said they worked awesome this year running 84 candy canes. :w00t:


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Any chance of getting the design files, if they are in EAGLE?
I'm trying to understand this board.
Why are there two pixel ICs?
I thought this was one chip per candy cane.

Wayne J wrote:If you guys want to make some, here are the gerber files. I talked to Dan, he said they worked awesome this year running 84 candy canes. :w00t:

Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

I don't use Eagle, they are in Protel.

Here is the BOM

IC1&IC2 = WS2803 (Ray Wu)
C1 & C2 = Mouser# 140-CC502B104K-RC (0.1uF 50v, Package Size: 1206 SMD)
R1 & R2 = Mouser# 71-CRCW1206-1.5K-E3 (1.5K ohms 1/4watt Package Size: 1206 SMD)


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

It is one chip per candy cane, but two chips per board. They were stacked two PCBs per box (they fit the TA200 box) to save on enclosures.


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Wayne,
Can you tell me which board house the CAM file is for?
If you have the files, can I send you a different CAM file to generate from?

Wayne J wrote:I don't use Eagle, they are in Protel.

Here is the BOM

IC1&IC2 = WS2803 (Ray Wu)
C1 & C2 = Mouser# 140-CC502B104K-RC (0.1uF 50v, Package Size: 1206 SMD)
R1 & R2 = Mouser# 71-CRCW1206-1.5K-E3 (1.5K ohms 1/4watt Package Size: 1206 SMD)


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

Thank you very much Wayne! Do you have the original board info too?

APC710 1

Reply
Page 8 / 10
Share: