One-Channel Control...
 
Notifications
Clear all

One-Channel Controller

99 Posts
21 Users
0 Reactions
38.8 K Views
Posts: 13
(@dpetryk)
Active Member
Joined: 17 years ago

Well I'm the guy that designed and built that 4 channel controller. I tried to get some interest in the Houston area with other like minded individuals but no one was interested.
SO I built 300 of the controllers and I use them in my show. A one of a kind of system. I use a string of LED lights that I had made in China custom ordered. I wanted to get the system simple and easy to use and sell it to the general public. But since I could not get any interest in the community I just quit trying to sell it to people that had not interest.

There just seemed to be a lack of interest overall and everyone has moved on to pixel lamps anyway.

I was interested in eliminating the communications cables. I did that by putting the communications on the AC power line. My strategy was a de-centralized or distribute the control system. It works great. I was working with LOR on using the power line communications but I dont think it worked too well for them primarily because the LOR controllers require two way communication for some things. My controllers do not because the communications is one-way. There is no need for two way communications. My system only uses abut 6 feeder cords that have plugs wherever there are controllers to be powered. All the lights on the house (150 channels) are on one cord. Controllers hung on the house near the lights. As you can see on the video the controllers are mounted on the arch. They are in a wall wart enclosure and potted for environmental protection.

What I refer to the transverter in the video simply modulates the serial data stream on the 120 vac power line. The controllers de-modulate the data stream and respond in the usual way. The key was finding a circuit that could extract the serial data stream off the power line that had a bandwidth of at least a megacycle because I wanted to pass DMX through it and DMX data stream clocks at quarter megacycle (250k baud rate). My circuit ended up to be ten times faster than I needed and it only cost about $2 to build. It was what made the power line communications (PLC) work.

I have a new design that eliminates the big blue transformer and maybe the other large inductor as well. I wanted to mold them on the light string and build them for really cheap and make a bizillion dollars. I dont think the market is there and It would take a truck load of money to get them on the shelves or retailers.

What you see is the first prototype of the system I wanted to be sure the concept worked in a real world deployment. It does. It saves a bunch of time and hassle setting up a display. It eliminates a bunch of wire. Controller addressing has to be managed properly. Cost high because I had to include the development costs but it could be made very inexpensive. Controllers remain on the light fixtures so setup and take down is faster.

I own an industrial control systems company and my time is limited so there would have to be a decent incentive to continue the development of the system.

So there you have it - mystery solved. - Video can be seen here - www.youtube.com/watch?v=TAh1gg0u8Xk

P3042827
P6172978
P6172982
PB262734

Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Very Impressive.
Why sell to retailers when a killer design on this and planet Christmas could sell thousands of devices?

dpetryk wrote:Well I'm the guy that designed and built that 4 channel controller. I tried to get some interest in the Houston area with other like minded individuals but no one was interested.
SO I built 300 of the controllers and I use them in my show. A one of a kind of system. I use a string of LED lights that I had made in China custom ordered. I wanted to get the system simple and easy to use and sell it to the general public. But since I could not get any interest in the community I just quit trying to sell it to people that had not interest.

There just seemed to be a lack of interest overall and everyone has moved on to pixel lamps anyway.

I was interested in eliminating the communications cables. I did that by putting the communications on the AC power line. My strategy was a de-centralized or distribute the control system. It works great. I was working with LOR on using the power line communications but I dont think it worked too well for them primarily because the LOR controllers require two way communication for some things. My controllers do not because the communications is one-way. There is no need for two way communications. My system only uses abut 6 feeder cords that have plugs wherever there are controllers to be powered. All the lights on the house (150 channels) are on one cord. Controllers hung on the house near the lights. As you can see on the video the controllers are mounted on the arch. They are in a wall wart enclosure and potted for environmental protection.

What I refer to the transverter in the video simply modulates the serial data stream on the 120 vac power line. The controllers de-modulate the data stream and respond in the usual way. The key was finding a circuit that could extract the serial data stream off the power line that had a bandwidth of at least a megacycle because I wanted to pass DMX through it and DMX data stream clocks at quarter megacycle (250k baud rate). My circuit ended up to be ten times faster than I needed and it only cost about $2 to build. It was what made the power line communications (PLC) work.

I have a new design that eliminates the big blue transformer and maybe the other large inductor as well. I wanted to mold them on the light string and build them for really cheap and make a bizillion dollars. I dont think the market is there and It would take a truck load of money to get them on the shelves or retailers.

What you see is the first prototype of the system I wanted to be sure the concept worked in a real world deployment. It does. It saves a bunch of time and hassle setting up a display. It eliminates a bunch of wire. Controller addressing has to be managed properly. Cost high because I had to include the development costs but it could be made very inexpensive. Controllers remain on the light fixtures so setup and take down is faster.

I own an industrial control systems company and my time is limited so there would have to be a decent incentive to continue the development of the system.

So there you have it - mystery solved. - Video can be seen here - www.youtube.com/watch?v=TAh1gg0u8Xk


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

Cburg, there is a candy cane mod to leds using a WS2803 I think it was. The pixel chip would control 18 channels so 18 leds per cane and the board took standard Renard input. It was developed down under and a guy in Florida used them here on this forum. I don't remember the name of the thread. I may be able to find the name if anyone is interested?

Found the link http://www.ohio-lights.com/projects/candycanes/index.cfm


Reply
kingofkya
Posts: 2165
(@kingofkya)
Noble Member
Joined: 15 years ago
dpetryk wrote:Well I'm the guy that designed and built that 4 channel controller. I tried to get some interest in the Houston area with other like minded individuals but no one was interested.
SO I built 300 of the controllers and I use them in my show. A one of a kind of system. I use a string of LED lights that I had made in China custom ordered. I wanted to get the system simple and easy to use and sell it to the general public. But since I could not get any interest in the community I just quit trying to sell it to people that had not interest.

There just seemed to be a lack of interest overall and everyone has moved on to pixel lamps anyway.

I was interested in eliminating the communications cables. I did that by putting the communications on the AC power line. My strategy was a de-centralized or distribute the control system. It works great. I was working with LOR on using the power line communications but I dont think it worked too well for them primarily because the LOR controllers require two way communication for some things. My controllers do not because the communications is one-way. There is no need for two way communications. My system only uses abut 6 feeder cords that have plugs wherever there are controllers to be powered. All the lights on the house (150 channels) are on one cord. Controllers hung on the house near the lights. As you can see on the video the controllers are mounted on the arch. They are in a wall wart enclosure and potted for environmental protection.

What I refer to the transverter in the video simply modulates the serial data stream on the 120 vac power line. The controllers de-modulate the data stream and respond in the usual way. The key was finding a circuit that could extract the serial data stream off the power line that had a bandwidth of at least a megacycle because I wanted to pass DMX through it and DMX data stream clocks at quarter megacycle (250k baud rate). My circuit ended up to be ten times faster than I needed and it only cost about $2 to build. It was what made the power line communications (PLC) work.

I have a new design that eliminates the big blue transformer and maybe the other large inductor as well. I wanted to mold them on the light string and build them for really cheap and make a bizillion dollars. I dont think the market is there and It would take a truck load of money to get them on the shelves or retailers.

What you see is the first prototype of the system I wanted to be sure the concept worked in a real world deployment. It does. It saves a bunch of time and hassle setting up a display. It eliminates a bunch of wire. Controller addressing has to be managed properly. Cost high because I had to include the development costs but it could be made very inexpensive. Controllers remain on the light fixtures so setup and take down is faster.

I own an industrial control systems company and my time is limited so there would have to be a decent incentive to continue the development of the system.

So there you have it - mystery solved. - Video can be seen here - www.youtube.com/watch?v=TAh1gg0u8Xk

Neat what kinda speed and reliability are you getting over the power line?


Reply
Posts: 13
(@dpetryk)
Active Member
Joined: 17 years ago

The fidelity of the circuit is outstanding. I could probably 10X the fastest that I have done which is DMX or 250k.

Reliability is 100% as far as I can tell. I don't have any issues.


Reply
Page 10 / 20
Share: