Awesome! Somehow I missed that you were affiliated with diyledexpress. Duh.
No problem. I can wait a week.
Question: How many Pixels can the PX1 and the Pixel Extender control?
Thanks everyone!
Buddy
UBotBuddy wrote:Awesome! Somehow I missed that you were affiliated with diyledexpress. Duh.No problem. I can wait a week.
Question: How many Pixels can the PX1 and the Pixel Extender control?
Thanks everyone!
Buddy
You *could* put all 2048 pixels on one, but you'd be better off with a lower amount as getting up that high slows down the refresh rates.
UBotBuddy wrote:For the Pixel Extender just go to the Mouser BOM at
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=7ab47643dbScroll down and you will find one part in Red and that is an Obsolete part.
In the Order Quantity column it does suggest a similar part BUT I have no
clue if that is a valid replacement. I would hate to spend good money and
end up with a square part for a round hole.I just checked the E1.31 Bridge and someone has fixed that BOM. There
were 2 or 4 obsolete parts there. I will order that one on payday. Thanks
to the person that fixed that.Buddy
Thats about the most generic part on the list:)
Here is a replacement.
http://www.mouser.com/ProductDetail/3M-Electronic-Solutions-Division/4808-3004-CP/?qs=sGAEpiMZZMv9Q1JI0Mo%2ftWDtun0uhXCX
Thanks Kingofkya! I appreciate the replacement part listing.
As you probably noticed I learned that dlovely is diyledexpress so I will stick with him. I am a firm believer in supporting members.
😛 Buddy
