New WS2811 Tester
 
Notifications
Clear all

New WS2811 Tester

24 Posts
9 Users
2 Reactions
5,813 Views
joeytx
Posts: 249
Topic starter
(@joeytx)
Reputable Member
Joined: 19 years ago
[#58245]

I have designed a new pixel tester using the 2.8'' ESP32 Module ESP32-2432S028R 240X320 Smart Display Screen with touchscreen. The tester is in a self contained enclosure and all you have to do is add a power supply.

The parts are relatively easy to get, and I have taken an existing 3D enclosure and modified it. Only soldering needed is to attach a few wires together no parts soldered.

Test Performed:
All Red at 25%; All Green at 25%; All Blue at 25%; Count pixels - every 5 Red, every 10 Green, every 50 Blue, Count up to a entered number (stays in EEPROM, can be assigned), All White at 22%;

If you want to test 5V and 12 V pixels you can add a 5AMP 5VDC regulator and have two outputs.

If there is any interest I will post a link later this week to all files, let me know.

Parts needed for 5VDC pixels:
1 ea ESP32-2432S028R Smart Display
1 ea Bullet style pixel (WS2811)
1 ea Switch
1 ea Power inlet
1 ea X-connect or other style cable

Optional For 12VDCV Pixels:
1 ea 7805 voltage regulator or your choice DC-DC 5V step Down Converter Regulator

ESP32 2432S028R
IMG 0559
IMG 0558
IMG 0559
IMG 0562
IMG 0563
IMG 0564

23 Replies
mikeh65
Posts: 794
(@mikeh65)
Prominent Member
Joined: 19 years ago

Looks interesting, will watch this.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

Is this intended for just bench-testing, or would it be used for outdoor testing as well?

Also, what is the single bullet-style pixel for?


Reply
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago

Looks interesting!


Reply
Kev7274
Posts: 2037
(@kev7274)
Famed Member
Joined: 13 years ago

Great,something else I will have to build.....seriuosly though,looks good. Waiting to see the files.


Reply
Page 1 / 5
Share: