New Controller desi...
 
Notifications
Clear all

New Controller design

131 Posts
26 Users
0 Reactions
44.7 K Views
dirknerkle
Posts: 10308
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
JHinkle wrote:
With a little work - 24 channels at 4096 illumination levels may even be possible.

I am suddenly confused. My understanding of Vixen is that it provides a way to set the illumination level based on a percentage of the total. Insofar as there are really only 100 "units" in 100%, how would 4096 levels be any better than 255? For that matter, why would 255 be better than 100? Maybe I'm wayyyyyy out of whack here or my 62-year old pea brain just isn't working, but since the range goes from 0-100%, how could there ever be more than 100 illumination levels?


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

First, there are 256 levels of dimming in the Vixen design, not 100. When you say, for example, 75% in Vixen, that is stored as 255*3/4, or 191 in the Vixen output data file. That 191 (or is it 192??) is what becomes transmitted to the DMX or Renard boards.

What I had in mind above is that when the controller receives 191, it internally does a lookup to obtain a 10- or 12-bit value. This 8-bit to 10/12-bit translation is to linearize the light output. This, I think, is what happens with those intelligent RGB pixel strings.

He takes this one step further. If you know how the controller works internally, you can move some (or most) of the processing that happens in the controller back into a (new) Vixen output module.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

BTW, I think that this could also be done in the Renard firmware. I'm not sure if the PIC16F688 has enough bandwidth to do 10-bit or 12-bit dimming, although I can't be sure without coding things up. If not, the PIC16F1823 is a faster part that fits in the same socket as the PIC16F688.


Reply
Mactayl
Posts: 2491
Guest
(@mactayl)
Famed Member
Joined: 17 years ago

I was thinking that some of the PIC18Fxxxx devices should be able to handle some of those requirements with not to much trouble?


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

As far as I know there aren't any 14-pin parts that would fit in the sockets on the Renard boards.


Reply
Page 3 / 27
Share: