MiniRen8/4
 
Notifications
Clear all

MiniRen8/4

130 Posts
29 Users
0 Reactions
50.4 K Views
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
dirknerkle wrote:He had a couple prototypes made up of that one but it had problems -- the board had 6oz copper, wasn't tinned and no soldering irons were hot enough, so he tried a mig welder and, well, Mrs. Budude objected to the sparks on the kitchen table, and the rest is history. 🙁

Yeah - but no cold solder joints - that baby is ON there! 😎


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I have posted the Express PCB file, a couple JPGs and a complete PDF manual in the Copper section of the file library for the MiniRen8/4XB. I have also ordered a short run of production boards and will post more information in the group buys area for those who are interested.

This has been quite a fun project -- it went all over the place, and I'll also be assembling more information about the WiRen system I devised during the development process and posting those PCBs in the file library, too. Just FYI, it's possible to connect some of the WiRen boards to the MiniRen8/4XB, too... 😎

Lastly, budude has graciously offered to show me his mig welding technique on copper circuit boards. He says I need to bring my own gas mask because of the copper fumes. 😆

-dave


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago

Good Lord Dirk. How do you do it? How fortunate we are to have accesss to people like you. While I doubt I'll ever use them in my display, I read through the documentation and once again, I'm blown away. Since I already have the XBee modules and most of the other components as well, I may etch one up and try it out.

Excellent Work!


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Some interest was expressed by some DIYC members in the WiRen system I prototyped during the development of the MiniRen8/4XB.
I have added everything known to humankind about WiRen in the File Library under the section named "Copper."

MiniRen8/4XB board buy status update: as of this posting, 25 boards are left out of the batch of 50 on order. When they're gone, they're gone.


Reply
griffixdc
Posts: 2512
(@griffixdc)
Famed Member
Joined: 16 years ago
dirknerkle wrote:Some interest was expressed by some DIYC members in the WiRen system I prototyped during the development of the MiniRen8/4XB.
I have added everything known to humankind about WiRen in the File Library under the section named "Copper."

MiniRen8/4XB board buy status update: as of this posting, 25 boards are left out of the batch of 50 on order. When they're gone, they're gone.

what is this ? and how much? pm me if you want i am not available as much as i used to be replying through PM would probably be better:)


Reply
Page 16 / 26
Share: