Mac Software Develo...
 
Notifications
Clear all

Mac Software Developer seeks PCB/Electronics Guru..

37 Posts
13 Users
0 Reactions
14.9 K Views
Posts: 49
Topic starter
(@eldiablo)
Trusted Member
Joined: 18 years ago
[#11277]

Ok.. this might sound like a really bizzare thing to want to put out there, but i've been doing a little reading around, (yes.. i've been cheating on you DIYC.. sorry!!!) There seems to be this strange murmurings about having to run light programs on windows and not mac.

Now, i know that with linux its easy and stable to run software servers, but what if, like me, you're a home user and you've got say a mac mini and you REALLY don't want to have to sully your apple fanboy by installing anything to have to run a windows program??
Simple answer, there's nothing out there. you can't even run LOR on parallels without crashes or compatability issues with certain USB to serial controllers..

So, my idea as a mac programmer is to try to come up with something for the mac users that not only sits and runs on a mac mini, but as its apple OS, you'll be able to tuck it away in a corner somewhere, remote in with ANY computer to control it direct, or (and this is something for a later point in development..) maybe even login with your iPhone or iPad.

The biggest issues i have at the moment that are kinda major ones really is this: I have no knowledge of the electronics side of this at all other than it uses triacs or IC's and thats all the buzz words i know.. lol
But, from my day job working in a theatre, i also know how DMX works and how beneficial it is to the christmas lights scene if only its used properly.
Secondly, If you're gonna re-invent the standard, then lets do it properly and take advantage of the one thing the mac does well and that is Firewire.. the NEW 1394c that is installed in all new intel macs across the board will support 800Mbits/s full duplex and will happily run over 100meters of cable.

Imagine the possibility of being able to run your full audio, sync and controls over the same wire to your master control box, then just with cat5 to the submasters.. all with the capacity to send out full audio, sync and control in full duplex. Plus with full DMX support as well as in-house triac control.
Now (in future development...) imagine being able to login to your mac mini light software with your iphone and control the start, stop, playlist, schedule, even the option for a full lamp test at 70% light so you can check you're not out bulbs.. all from your iPhone.. add into that a mini iPad app bundled with the software that will allow you to make additions and changes to the show scene from the garden on the fly..

Alas though, i'm now at a loss for direction and control as I need to find someone with the PCB and electronics experiance and knowledge to be able to share my vision and help create this masterpeice of modern lightshow control 🙂 Why am i so hyped up about this?? well for two reasons really.. One is i want to make something that will benefit this community and really make people start to push the boundries even further as far as OS and functionality for the novice home user, (not the real geeky types like you and me that aren't afraid to burn fingers with soldering irons and debug code..)
And secondly because of all things i'm trying to quit smoking and need to keep my mind and hands busy with something, and I have found that coding things keeps me pre-occupied and my mind off the nasty cancer inducing smoke sticks..

So, I appeal to you on bended knee to take me back after this one indiscretion, and to help me out a little here with someone that will chat to me and help me make sense of this madness and possibly even help me come up with a solid tangable final product to offer everyone.

So who's with me??? please don't all head for the door at once!!!!!! :(:(:(


36 Replies
Posts: 604
(@aussiephil)
Honorable Member
Joined: 19 years ago

I guess where to start...........

Firstly good idea to develop software for the MAC platform for this hobby.
There is stuff out there, think mph is firmly in the MAC world. MPH?

Initial thoughts would be to do the software with protocol support for DMX via USB and Streaming DMX via ethernet, thus removing the complexities of hardware development at the same time.
As the renard series can speak DMX and it seems most newer controllers are now speaking DMX it's a logical place to start

Open and honest, i don't own a MAC, but i do have an iphone, and I have DMX based hardware.

I would suggest to you that DMX is already used properly by thousands of people in this hobby, it just is not obvious from reading DIYC how widespread it is due to the high focus on the Renard series and the corresponding serial connection and protocol normally used.

Why use Firewire when 1Gb Ehternet is already everywhere and Cat5/6 is cheap as, not sure i want the price on a 100m Firewire cable.

Please i'm not knocking the idea and i hope that people crying out for MAC software raise their hands to help.

I can imagine the vision, just small steps will help though.

I would be happy to chat further if you like.
Cheers
Aussiephil


Reply
Posts: 66
(@thaiway)
Estimable Member
Joined: 18 years ago

My hand is raised... even waving!

Sure don't have any knowledge that would be of help in development tho.

John


Reply
mrpackethead
Posts: 2289
(@mrpackethead)
Famed Member
Joined: 19 years ago
aussiephil wrote:
There is stuff out there, think mph is firmly in the MAC world. MPH?

Yes, i'm a mac user, but also unix and windows where they are better for the job at hand, ( or there is no alternative ).

Initial thoughts would be to do the software with protocol support for DMX via USB and Streaming DMX via ethernet, thus removing the complexities of hardware development at the same time.

Yes, stick to outputing stuff via either an Entec USB dongle ( or clone ) to DMX-512 or write some stuff that outputs ACN or Art-net.

As the renard series can speak DMX and it seems most newer controllers are now speaking DMX it's a logical place to start

Open and honest, i don't own a MAC, but i do have an iphone, and I have DMX based hardware.

I would suggest to you that DMX is already used properly by thousands of people in this hobby, it just is not obvious from reading DIYC how widespread it is due to the high focus on the Renard series and the corresponding serial connection and protocol normally used.

Why use Firewire when 1Gb Ehternet is already everywhere and Cat5/6 is cheap as, not sure i want the price on a 100m Firewire cable.

Please i'm not knocking the idea and i hope that people crying out for MAC software raise their hands to help.

I can imagine the vision, just small steps will help though.

I would be happy to chat further if you like.
Cheers
Aussiephil


Reply
Posts: 49
Topic starter
(@eldiablo)
Trusted Member
Joined: 18 years ago

Thanks for the replies.. its interesting to see just how quick people reacted to the call of mac 😛

I feel that i didn't get my hardware idea over well enough.. so this is what i was thinking about doing.

Mac Mini Server connected by firewire to a Master Controller within the max distance for a single firewire connection. (this is mainly to cut down as mentioned on the cost of firewire cables..)

From this master controller we run Cat5 out to all the subcontrollers which in theory could be anything like a renard that will accept the cat5 header cable and pass on the information to the next in line.

The main reason for firewire to the master is to increase speed over USB and to keep the ethernet port totally free to connect to the house network to enable remote access to the machine itself. Plus with the firewire, its data transfer is far superior to that of even USB3.0 at the moment.. hence why its the data transfer protocol for the F22-Raptor and Nasa's shuttles...

The design theory on the submasters though is to make each one its own DMX512a universe.. so you address each box by its universe ID, thus giving each box the option of addressing 512 DMX ready devices minus the 16 or 32 hardwired light strings already plugged in. What makes this idea slightly interesting is that we could then, in theory, just expand something like a mega tree by manufacturing simple single light controllers that hook up in the dmx line from a submaster and are selectable by dip switches to their address..
That way you're not having to use multiple boxes just to channel a mega tree, you can use a submaster and dmx slave cells leaving you up to 512 channels per controller or tree... with all this RGB color ribbon stuff coming out, its gonna be needed soon!!

Also with the idea of making each one a universe, you can connect your 16 or 32 lights to it, and even add in from that submaster hub a Mac or Martin moving head unit... or snow machine.. or hazer.. or anything really that runs on DMX.. but from each submaster rather than running extra cable around the garden to address each unit. The software idea in my mind at the moment is coping with moving head units and any other dmx systems..

On a side note, whats the max amps you can pull through a single channel at the moment?? is it anywhere near 16A???

Anyways.. appologies for being slightly all over the place with this post.. i've not long woken up and my head still isn't awake.. lol..
Thanks for the replies so far though guys!! its encouraging!


Reply
Page 1 / 8
Share: