ags0000 wrote:OK, so I'll wait for you to have the Logic in hand for a day or two - and then you can share your opinions on the unit as well as the new protocol(s) you will have developed by then 🙂
Funny! Too bad I don't write in C++, I will however request that they create a wizard for this sort of stuff.
DynamoBen wrote:Sorry for the delay my email notifications from this forum are a bit sporadic.Still on back-order, should see it by end of month. I can fill you in more then.
The difficulty of writing an analyzer really depends on your experience. They provide a C++ SDK and this is what they say about how long it would take:
"...implementation of a custom protocol will probably take an experienced c++ developer at least a full day, and possibly up to a week, to complete. You will probably want to have had considerable programming experience, probably significant C++ experience – before taking it on.
That said, you can get away with implementing only a small part of the full capability of the analyzer. For example, you could have only one setting (the input channel(s) to use), you could skip creating simulated data to test against; and not bother providing for data export or tabular display."
I would have to agree to the post 2 posts below me....makes me curious as to your occupation, your very knowledgeable when it comes to programming, i swear you can write a complete program/firmware before i understand a program 🙂
griffixdc wrote:I would have to agree to the post 2 posts below me....makes me curious as to your occupation, your very knowledgeable when it comes to programming, i swear you can write a complete program/firmware before i understand a program 🙂
It's off topic but: I'm a software tester during the day, and I do electronics as a hobby at night. When I first started I wrote bad slow code and learned by altering other peoples code. I've since gotten better, and now write most of my code from scratch...I guess practice makes perfect (or better in this case). 😉 My coding skills started in high school with QBASIC, then moved to the basic stamp, then PIC (in BASIC), then Parallax SX, and now Propeller. Beyond firmware and electronics I do occasionally do scripting at work in VBScript and Python. While I don't love programming, I do like the end result.
DynamoBen wrote:Funny! Too bad I don't write in C++, I will however request that they create a wizard for this sort of stuff.
See if the wizard can figure out what you want and just write the entire thing automatically...
I can see an opportunity for some bartering/cooperation here: I'll gladly write 10k lines of C++ if you'll write all that SPIN & PASM stuff.
Spare cog, anyone? 🙂
So I received my Saleae Logic analyzer a week ago and I have to say that I love it. It's easy to use and is technically very capable. In a matter of minutes I was able to sort out a timing issue I was having on a pixel string and this weekend I was able "see" the data I was sending to my shift registers which made development a breeze. At $140 it was worth it and over the coming months I'm sure it will pay for itself.
Thanks for all the feedback and suggestions.
