Aurbo99 wrote:MacCan you look at the data pins from J2 to U7 and U8.. they appear to be connected to the wrong Ux pins.
Good eyes but pins 1,3 and 4 of the VO2223a are all connected together internally in the device.
If your going to add one after the fuse, why not one before too?
That way you know you have AC on the board.
Mactayl wrote:I have made some small changes on the LCSSR 8 before it goes to the PCB house, there has been a indicator added to let you know that you have AC power to the opto/triacs as long as the fuse has not blown out you can take a quick look at the green which LED lets you know your AC power is there,, also there are LED indicators for each group of 4 channels that lets you know if your cat5 cable is plugged in. Changes to the files are in post #1 of this thread..Thanks for interest
Mac
ukewarrior wrote:If your going to add one after the fuse, why not one before too?
That way you know you have AC on the board.
Let me see what kind of room I have and see what I can do,,,
Thanks David,,,
The LCSSR8 PCB's have been completed for awhile but we waited for some of the other low current SSR group buys to near completion. The LCSSR8 will be available any time at N7XG's store.
http://n7xgshop.net/shop/category.php?id_category=5
We are pleased to announce the latest board to our collection of DIYC Christmas projects, The Low Current SSR8 relay board. This board is designed for low current applications such as candy canes, wreaths, stars, etc. It is based on the VO2223 chip.
More information can be found at:
And boards can be purchased from :
http://n7xgshop.net/shop/product.php?id_product=22
Looks good! Nice work, Mac and Dean!
Looks good guys! What's the BOM cost on one of these?


