Hi Folks,
We have decided to jump on the Low Current SSR Bandwagon,, so we have come up with the LCSSR 8,, It can be used with the Simple Renard 8, Simple Renard 16, Simple Renard 32 and the Ren64. Just need to do some clean up and they will be headed out to the PCB House
BTW the mounting holes are designed to fit in a CG-500 case
Mac,
Any chance of moving the mounting holes further away from the terminal blocks?
Nice work!
ukewarrior wrote:Mac,Any chance of moving the mounting holes further away from the terminal blocks?
Nice work!
The T Blocks are actually smaller then they appear,, what you are seeing is the silk screen that reads HOT/NEU and C1/NEU so the screws are back a bit.
edit.. David you are right so I moved the C1/NEU trace back just a bit..
Thanks.
Out of curiosity, how wide are the high current tracks going to the fuse?
David_AVD wrote:Out of curiosity, how wide are the high current tracks going to the fuse?
.150 with 2oz copper
Nice and heavy duty. 🙂
I saw the title and thought it was a 8 channel LCC like the Simple Renard 16 LCC not a SSR.
I had my wallet half out before I saw it was a SSR. I'll wait for the next board. 🙁
Brian
Skunberg wrote:I saw the title and thought it was a 8 channel LCC like the Simple Renard 16 LCC not a SSR.
I had my wallet half out before I saw it was a SSR. I'll wait for the next board. 🙁Brian
We can make one of them too...:thup:
I have made some small changes on the LCSSR 8 before it goes to the PCB house, there has been a indicator added to let you know that you have AC power to the opto/triacs as long as the fuse has not blown out you can take a quick look at the green which LED lets you know your AC power is there,, also there are LED indicators for each group of 4 channels that lets you know if your cat5 cable is plugged in. Changes to the files are in post #1 of this thread..
Thanks for interest
Mac
Mac
Can you look at the data pins from J2 to U7 and U8.. they appear to be connected to the wrong Ux pins.
