Glow Wire
 
Notifications
Clear all

Glow Wire

12 Posts
9 Users
0 Reactions
5,658 Views
Posts: 151
(@bf210)
Estimable Member
Joined: 18 years ago

Yet another link about using the stuff.
(yet another Don)


Reply
Posts: 175
(@aususer)
Estimable Member
Joined: 17 years ago

from the elwire.com link's FAQ..
"This is electroluminescent wire, basically, its a copper core wire, with a phostphor material sputtered onto it, then 2 very fine small wires like 26 gauge wrapped
around it, then ontop of that is a colors (sometimes - depends on the color) plastic coating, then a normal plastic insulation on top of that. When AC current at the
proper voltage, and frequency is applied to this wire, it glows very beatifully"

Being phosphor, I wonder if it will suffer the same problems as a TV screen left in sunlight?
leaving it in the sunlight 12 hours a day (ie her in Australian summer) might significantly reduce the " 7 years" lifetime they mention... ???

Looks awesome idea however... might see about sourcing some in Australia and give it a go!


Reply
dirknerkle
Posts: 10309
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I read somewhere that it wasn't supposed to be used in daylight. I don't know if that meant it wouldn't be visible in sunlight or whether sunlight would damage it. Those marketing guys deliberately write vague stuff...


Reply
Sharkey
Posts: 251
(@sharkey)
Reputable Member
Joined: 18 years ago
dirknerkle wrote:I read somewhere that it wasn't supposed to be used in daylight. I don't know if that meant it wouldn't be visible in sunlight or whether sunlight would damage it. Those marketing guys deliberately write vague stuff...

Apperently UV Rays, (Sunlight, for those who didn't know :rolleyes:) can lower the lifetime. Here's a snippit from a seller's website:

Can I use el wire outside?

Yes, but keep in mind, the phosphorous materials in el wire are photo reactive, and will degrade more rapidly when exposed to UV light. The 5mm wire is designed to provide more UV shielding, for wire that will be exposed to a lot of sunlight. (Not all colors are available in the 5mm size.) I really don't care for the 5mm wire personally, because the extra shielding means it is not quite as bright as the 2.5mm wire.


Reply
jrock64
Posts: 1099
(@jrock64)
Noble Member
Joined: 19 years ago

Here is my experience with it.
http://www.youtube.com/watch?v=kP0ho7_zV10
It worked OK but I did something else this year because I thought I had fried the controller. Turned out to be a bad switch that shut off when adjusted too high.
The central core is surrounded by two wires as fine as a hair that need to be soldered to the second connector.
My experience is also that the controller must be matched to the length of wire you want to drive.
Tight radius twists are possible but you can see the coating crack, which I am sure shortens its lie.
Good for fine detail work but not ideal for distance viewing due to small surface area.

Just my experience with it.

Joel


Reply
Page 2 / 3
Share: