PicKit2 Contents
 
Notifications
Clear all

PicKit2 Contents

5 Posts
5 Users
0 Reactions
2,774 Views
Sharkey
Posts: 251
Topic starter
(@sharkey)
Reputable Member
Joined: 18 years ago
[#10399]

Hey all! I just ordered my PicKit2 from the Microchip website, the bundle with the protoboard and programmer together.

Is this all I need to program my PICS for Renard boards? I can insert the PIC16F688 in the slot on the proto-board and program it?

Thanks!


4 Replies
mrpackethead
Posts: 2289
(@mrpackethead)
Famed Member
Joined: 19 years ago
Sharkey wrote:Hey all! I just ordered my PicKit2 from the Microchip website, the bundle with the protoboard and programmer together.

Is this all I need to program my PICS for Renard boards? I can insert the PIC16F688 in the slot on the proto-board and program it?

Thanks!

the protoboard has a socket, so yes you can, but personally id perfer to make a ZIF adaptor for it, so i did'nt have to yank it in and out, and risk bending / breaking pins.

Better still why does'nt anyone put ISCP on the renard pcbs? thats always got me?


Reply
WWNF911
Posts: 1722
(@wwnf911)
Noble Member
Joined: 19 years ago

Thats been my experience as well. I had to purchase the Ziff socket after cause using the proto board was just like installing and pulling the PIC into and out of a regular socket. This can be very tedious if you have to program several at once.

Leon


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 19 years ago

Yes, it has all you need.


Reply
Posts: 1079
(@bmcgeeny)
Noble Member
Joined: 18 years ago
mrpackethead wrote:the protoboard has a socket, so yes you can, but personally id perfer to make a ZIF adaptor for it, so i did'nt have to yank it in and out, and risk bending / breaking pins.

Better still why does'nt anyone put ISCP on the renard pcbs? thats always got me?

If you learn to be careful, you can only partially insert the pic into the socket. If the programer does not recognise the pic, you haven't got it in far enough.

A little practice and and it's pretty easy.

As far as programing them rigt on the boards like you do a Ren-C, I'd go for that.


Reply
Share: