i was thinking...if i want to create a lounge effect with my lights and controllers i could sequence my favorites songs and have lights dimm beat strobe flash blink to the music...
...then i was thinking wouldn't it be nice to have a program do that for you...
...so you build a program that you initiate how many channels you have; address them to certain frequencies and beat levels. Then just do your field layout, making sure that the appropriate type of light is of the appropriate beat...
...play your song or songs through this program and establish an unlimited amount of playlist quantity; creating that mood of ambiance, whether it be classical, jazz, rock , hip hop, techno, easy listening etc...
...if this programming and ingenuity is can be possible there should be a level 2 where location and pixel/ node, dmx, RGBW setups should be incorporated.
.....just thinking it would be neat if this was possible, but how if so?
Vixen has a plug-in called "Analog Frequency Spectrum" in the Plug-Ins menu that does *most* of what you describe above. You have to play with it a bit to understand how it works, but after a while, you can make it do some cool stuff.
Another option is to use the Renard/WinAmp tool. It essentially creates a Renard/Serial plug-in for WinAmp and you can map up to 24 channels to different frequency spectrum. I used it for Halloween one year because I didn't have time to sequence anything. Overall it worked pretty well and the nice thing is you can play any song you want and it automatically plays it - - aka color organ. You'll have to search around for that on here - haven't seen it mentioned for a while. Vixen is not used for this.
edit - found the link: http://doityourselfchristmas.com/forums/showpost.php?p=78914&postcount=10
dirknerkle wrote:Vixen has a plug-in called "Analog Frequency Spectrum" in the Plug-Ins menu that does *most* of what you describe above. You have to play with it a bit to understand how it works, but after a while, you can make it do some cool stuff.
huh ...neat didn't know that 🙂 ...
...but you still have to sequence every song, rather than have a program that you adjusted a "template" to your liking; this template will calculate and sequence every song according to the sound that is played and the channels used are adjusted by your initial programming in the template....i know Vixen has a date and queue logic's portion but i want something as simple as adding a song to a playlist or heck play my whole itunes library and have the template auto-sequence every song i have according to my sound-wave/frequency per channel count i have.
budude wrote:Another option is to use the Renard/WinAmp tool. It essentially creates a Renard/Serial plug-in for WinAmp and you can map up to 24 channels to different frequency spectrum. I used it for Halloween one year because I didn't have time to sequence anything. Overall it worked pretty well and the nice thing is you can play any song you want and it automatically plays it - - aka color organ. You'll have to search around for that on here - haven't seen it mentioned for a while. Vixen is not used for this.edit - found the link: http://doityourselfchristmas.com/forums/showpost.php?p=78914&postcount=10
Yay!!...this is along the lines i am looking for.....i will have to give it a look to see what its about ...and maybe give better ideas to our software programming geniuses we have on this forum 🙂
... does anyone have any ideas for such a program?
I've used the Winamp plugin before, I wasn't extremely happy with the result but I didn't spend a whole lot of time configuring it so I'm sure I could get it better. It was still cool to see the lights going without a sequence.
And then there is, for the DMX crowd, the VBlink Winamp plugin and DMXControl Combination. With a bit of tuning of Winamp and DMX Control's sound analyzer sound-to-light function...
how in depth does that plugin go for DMX and how many channels does it support?
CrazyG wrote:And then there is, for the DMX crowd, the VBlink Winamp plugin and DMXControl Combination. With a bit of tuning of Winamp and DMX Control's sound analyzer sound-to-light function...
Now that I will soon have a programmer DMX starts to become an option for me aswell, I've heard the DMX software is a bit better.
griffixdc wrote:how in depth does that plugin go for DMX and how many channels does it support?
As I recall when I played with it, Vblink uses the same data stream that drives winamp's spectrum analyzer. In DMXControl the sound analyzer breaks out the audio spectrum to 24 frequency bands each of which can be assigned to any number of DMX channels 1 through 1024. The sound to light part of DMXControl sends brightness level (0-255) to the assigned channels based on amplitude of the frequency band or you can set it to just do on/off at a selectable preset brightness.
It works, but the processing overhead contributes delay so someone watching intently will definitely notice. On another board, a long time ago, some folks discussing this deemed it suitable for casual "party lights" type usage but no substitute for actual sequenced programs.
Anyway that is what I can remember about it when I tried it.
Another winamp plugin possibility to look into is SoundGraffiti Dimmer if it supports the DMX dongle you happen to use and you don't mind parting with the cash to buy it ($100 I think).
