Thank you both! I brought everything home to test over the weekend. It definitely feels less daunting having read your posts and knowing there is documentation available.
steve123 wrote:Assembly manual is in the GitHub repo https://github.com/computergeek1507/PB_16
Is the link for the manual working correctly? When I try opening the PDF in the root directory of the GitHub repo it just says Kicad.
Does anyone have extras of either the BBB-Flex or PB-Flex boards? I bought the HC flex system as I like the stackable layout but I don't care for the web gui of the controller. As I use FPP everywhere else in my show I would like to convert it to just be another remote. It looks like this solution would let me keep the other components and just scrap the controller board. I figured I would check here first if anyone has an extra before I submit a request to have it manufactured.
Hello again! We have everything working I have a question about the USB.
The manual says the following: The USB port can also be used with a USB Audio Adapter. The USB port by default only supports unpowered USB devices. If you want to use a self powered USB device, remove F19. The USB port has minimal hardware and overcurrent protection. Only use certified USB devices to revent damage. Do not use the USB port to power high current devices like Raspberry Pi’s or a cell phone.
Ideally I'd like to use the usb for the wifi adapter, but then we cannot use it for audio without a hub. I don't want to damage it. I have a couple 4 port usb hubs with switchable ports. Do i have any other options to get wifi AND audio out?
A usb "OTG" adapter like: https://www.amazon.com/UGREEN-Adapter-Samsung-Controller-Smartphone/dp/B00LN3LQKQ
can be used to connect to the USB port on the PB to add another USBA port. Thus, wifi could be on one and sound on the other.
