I have extra copies of the 'g' version of the board if you need me to send you one.
PM me if interested.
FrozenTundra wrote:Im just north of Toronto, in Ontario.I began doing some hunting around for parts. I use digikey for all my personal and business stuff. Unfortunately it seems like the beagleboard is a tough one to find right now. (ive been trying to get my hands on some Raspberry Pi's the past few months and the great chip shortage has made them unattainable). Again i only spend a hr max yesterday researching this; was a busy night lol. But i might have a backup plan.
Again i greatly appreciate it, but im realizing that i dont think time frame wize ill be able to fab everything up and get it all working. Not all is lost though, i have a few arduinos floating around i could write some simple code to get the lights to atleast do patterns and such.
In the grand plan though, if im not mistaken, i believe Scott Hanson's controller is the way to go for me. Its basically what i was planning with the HinxspixPro, without the downsides..
Feature wise it works too; Main controller, remote nodes, standalone, Master, slave mode capabilities.. Just what i need to expand my show year after year.
I have 10 fully assembled (except for BBB header) of the BBB-16 boards. It is an experimental version I created using SMT components. I have been working with it for a couple weeks now and seems ok. One booboo though on the board with the mounting holes. I found out too late Scott did not put the mounting holes on the schematic and when I updated the PCB layout they went missing from the PCB and I failed to notice until too late .... it's not a fatal issue since both top and bottom of pcb are ground plane. So, you can simply drill the holes. I created a 3d printed template for doing that. I fixed the pcb layout and schematic.
FrozenTundra wrote:Im just north of Toronto, in Ontario.I began doing some hunting around for parts. I use digikey for all my personal and business stuff. Unfortunately it seems like the beagleboard is a tough one to find right now. (ive been trying to get my hands on some Raspberry Pi's the past few months and the great chip shortage has made them unattainable). Again i only spend a hr max yesterday researching this; was a busy night lol. But i might have a backup plan.
Again i greatly appreciate it, but im realizing that i dont think time frame wize ill be able to fab everything up and get it all working. Not all is lost though, i have a few arduinos floating around i could write some simple code to get the lights to atleast do patterns and such.
In the grand plan though, if im not mistaken, i believe Scott Hanson's controller is the way to go for me. Its basically what i was planning with the HinxspixPro, without the downsides..
Feature wise it works too; Main controller, remote nodes, standalone, Master, slave mode capabilities.. Just what i need to expand my show year after year.
Good to hear you have a backup plan. I am in Nova Scotia, so fellow Canuck.
Hello!
I am a computer science/Programming/Robotics Teacher at a STEM magnet school in Pennsylvania. Every year for the past 5 or so years (with the exception of last year when our schools were closed for the pandemic), my homeroom students (Management information systems class) has constructed and displayed a computerized light show. In previous years we just used lightshowpi, but this year, in part because a student created several sequences in xLights and also due to generous financial donations/grants, we decided to try building our own pixel based show.
We are using a Scott Hanson pb16 v2 controller. We are building a pixel tree with 800 lights (plus 50 for the star) and also another 1050 lights around the doors and windows outside my lab. We have two of the meanwell lrs 350 12v power supplies.
I checked Scott Hanson's github and I cannot find a manual or wiring diagram for setting this up and I want to make sure we don't fry anything.
How would we go about wiring the box so that the one 350 watt power supply runs the top row of the board and the other 350 watt power supply runs the bottom row. I have one power cord. Can this be done? There seems to be a lot of conflicting information online.
I have attached photos for reference. Any assistance would be greatly appreciated. Thank you!
The split is in the middle not top and bottom. The screw terminals on either side power the eight ports on either side. Make sure your Jumper for the pocket beagle power is set correctly if used.
Sent from my iPad using Tapatalk


