FPP PB16 Pixel Cont...
 
Notifications
Clear all

FPP PB16 Pixel Controller

630 Posts
62 Users
6 Reactions
389.7 K Views
DrNeutron
Posts: 2017
(@drneutron)
Noble Member
Joined: 14 years ago

Finally received the 3 pin connectors I ordered from China on the weekend and put together a board in an hour or so.
Scott, I just wanted to say that your instructions were very well laid out and everything went without a hitch.
The 2 pin connector holes for 5V power were too small for the connector, just shaved the legs down to fit.
Soldering a board is like therapy for me, I love it.....I have 4 more blank boards and I may just build them for the heck of it.
Wonder if anyone would trade a BOM for an E682?
:biggrin2:


Reply
Posts: 447
(@glycerine)
Honorable Member
Joined: 7 years ago
DrNeutron wrote:Finally received the 3 pin connectors I ordered from China on the weekend and put together a board in an hour or so.
Scott, I just wanted to say that your instructions were very well laid out and everything went without a hitch.
The 2 pin connector holes for 5V power were too small for the connector, just shaved the legs down to fit.
Soldering a board is like therapy for me, I love it.....I have 4 more blank boards and I may just build them for the heck of it.
Wonder if anyone would trade a BOM for an E682?
:biggrin2:

My boards are finally in the states, but I'm still waiting on a few parts from China. Can't wait to get this thing built!


Reply
Posts: 447
(@glycerine)
Honorable Member
Joined: 7 years ago

By the way, for the PocketBeagle connection, how many of you are soldering the male header pins to the main board and how many are using the female headers? Trying to decide which way to go...


Reply
DrNeutron
Posts: 2017
(@drneutron)
Noble Member
Joined: 14 years ago
Glycerine wrote:By the way, for the PocketBeagle connection, how many of you are soldering the male header pins to the main board and how many are using the female headers? Trying to decide which way to go...

Definitely solder the female connectors onto the board, what if the PB was blown? If you wanted to replace it, you would have to unsolder the pins before removing.
Using Female pins on the board makes it easy to swap out the PB.


Reply
Posts: 447
(@glycerine)
Honorable Member
Joined: 7 years ago
DrNeutron wrote:Definitely solder the female connectors onto the board, what if the PB was blown? If you wanted to replace it, you would have to unsolder the pins before removing.
Using Female pins on the board makes it easy to swap out the PB.

Oh, I'm sorry, I wasn't clear on what I was asking. I didn't mean solder just the male headers to both the pocketbeagle AND the mainboard, I was thinking about swapping the way it is done from the instructions and using the male headers on the board and the female headers on the PB, instead of the female headers on the board and male headers on the PB. Just wondering if there's a preference and why?


Reply
Page 22 / 126
Share: