Finally Affortable ...
 
Notifications
Clear all

Finally Affortable Snowfall Tubes (FAST)

448 Posts
68 Users
0 Reactions
262.9 K Views
n8huntsman
Posts: 562
(@n8huntsman)
Honorable Member
Joined: 16 years ago

I'm just using vampire plugs and spt2. Probably not a could idea because someone could plug them into 120vac, but that's what I had lying around.


Reply
Posts: 1744
(@tjetzer)
Noble Member
Joined: 18 years ago

We are offering 2 conductor waterproof connectors during our sale. You can check them out here.


Reply
Posts: 132
(@danozfw)
Estimable Member
Joined: 15 years ago
tjetzer wrote:We are offering 2 conductor waterproof connectors during our sale. You can check them out here.

I already ordered some of these from your store (along with a bunch of other stuff), now I'm looking for a way to attach a number of FAST tubes to one long power cord.

Dan


Reply
Posts: 185
(@lefserev)
Estimable Member
Joined: 16 years ago
danozfw wrote:I already ordered some of these from your store (along with a bunch of other stuff), now I'm looking for a way to attach a number of FAST tubes to one long power cord.

Dan

I've been thinking about how to connect my 8 FAST tubes and have come up with a possibility.

Using the 2 conductor waterproof connectors for DIYLEDExpress, solder/connect 1 male and 1 female in holy matrimony to each FAST controller. You'll end up with 2 connectors on each tube and the tubes will be wired up in parallel. The important step is to make one connector or wire much longer than the other to reach the previous FAST tube.

By making the wire that receives the 5V power the longer one, your last FAST tube won't have a wad of wire to deal with.

Also please make suggestions... I'm still thinking


Reply
Posts: 1744
(@tjetzer)
Noble Member
Joined: 18 years ago
Lefserev wrote:I've been thinking about how to connect my 8 FAST tubes and have come up with a possibility.

Using the 2 conductor waterproof connectors for DIYLEDExpress, solder/connect 1 male and 1 female in holy matrimony to each FAST controller. You'll end up with 2 connectors on each tube and the tubes will be wired up in parallel. The important step is to make one connector or wire much longer than the other to reach the previous FAST tube.

By making the wire that receives the 5V power the longer one, your last FAST tube won't have a wad of wire to deal with.

Also please make suggestions... I'm still thinking

Why use two 2 wire connectors when you can use one 4 wire connector? Use the 4 wires to connect to the FAST controller in a "Y" configuration and use the 4 wires on the other side of the connector to split in and out.


Reply
Page 63 / 90
Share: