Finally Affortable ...
 
Notifications
Clear all

Finally Affortable Snowfall Tubes (FAST)

448 Posts
68 Users
0 Reactions
263.1 K Views
chelmuth
Posts: 1077
Topic starter
(@chelmuth)
Noble Member
Joined: 16 years ago

It was the First where all LED's were tied to line 1.. I like first one better.. Double sided would be cleaner. Ourpcb.com had some really decent pricing in quantity for my 2cm x 50cm design. I bet they would have some decent pricing for your design too. I mean we are probably talking 1000+ boards. for 10 fullsize tubes it would be 80 boards. So I'm sure it'll add up quickly.. especially with people wanted 20+ tubes.. I know I want to have 48ish tubes when i'm done. Maybe a discussion with budude about his manufacturer since he's close to having several board runs I believe. All this together would make a nice offsite Co-op all LED's, boards, PICs at one stop..


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

Here is a newer version of the board. It's pinout is the same as the first board in the above post. The trace width is .020", which I think is adequate, and the trace spacing is .015" (except where the traces go underneath the left LED and the dense spot at the bottom of the board).

LED module pcb 2

Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

Also, I wonder about the practicalities of implementing this as a flex strip, rather than as a PCB.


Reply
chelmuth
Posts: 1077
Topic starter
(@chelmuth)
Noble Member
Joined: 16 years ago

Phil, your image is broken.. My hand made ones with the Rear Protection diffuser are fairly flexible. It seems I read on one of the PCB sites they made flexible PCB's.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

The image is visible here, I'm not sure what the problem is.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

I cleared the cache, now I can't see it either. Let me re-upload it.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

Is that better?


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

Advanced Circuit seems to be able to do flex circuits, except they won't let me get a quote. The other question is whether you solder to them, or they are just intended as inter-connects.


Reply
chelmuth
Posts: 1077
Topic starter
(@chelmuth)
Noble Member
Joined: 16 years ago

Perfect.. They look good..


Reply
chelmuth
Posts: 1077
Topic starter
(@chelmuth)
Noble Member
Joined: 16 years ago

Here's a short video of 4 of the tubes running from Vixen Via Ren48LSD..


Reply
Page 13 / 45
Share: