Effects Discussion
 
Notifications
Clear all

Effects Discussion

8 Posts
3 Users
0 Reactions
5,210 Views
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago

You can do a lot of things with Chase, Pulse and Wipe. AC or Pixels. IMHO.


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 19 years ago

Interesting, that's what I thought you might have meant. I would also think of adding a dfplayer and amp so that it becomes something like a "wee little talker", except for lights instead of servos. There are lots of useful ideas in the Halloween prop world for that type of device.

You're right about processor prices, so most of the cost is going to be in the SSR's and interconnect.


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 19 years ago

As a side note, an alternate build of the Renard-SS boards (using PIC16F1825 processors instead of PIC16F688 processors) with appropriate firmware could provide an elementary version of a standalone controller. That part has plenty of internal instruction bandwidth, and plenty of self-writable FLASH memory for holding effects data/instructions. It also has the resources for 1024 or perhaps 2048 levels of dimming for smooth effects-based brightness ramping effects. A long pulse on the serial input line could be used as a trigger from a PIR or similar.

Some of this I've coded for other projects, but I don't know if I want to pursue this very far given the generally declining interest in AC controllers.


Reply
Page 2 / 2
Share: