Dead man walkin
 
Notifications
Clear all

Dead man walkin

16 Posts
5 Users
0 Reactions
6,801 Views
Posts: 150
Topic starter
(@sparkey)
Estimable Member
Joined: 19 years ago

I really don't know anything about these components, other than a 555 is a timer chip, that's why I'm here. If you have some form of working example I might be able to learn from -- Please, tell me more.

Like I said in a previous post I'd like this to be a separate and stand alone board so it would be easy to hide within the display. So everything on just one board is what I'm looking for.

Thank you for your input.
Sparkey

smartalec wrote:have you even thought of something realy easy.
a 4017 counter ic , thats 10 outputs. an a 555 counter ic to pulse the 4017 as to the speed.
there loads of examples if you put them in google search.

My first display 5yrs ago, i had 5x 4017 counter ic's connected to transistors to handle the extra current i was drawing, an a 555 to pulse each of the 4017 counters.

is this the track your thinking of?
alec.


Reply
Posts: 859
(@smartalec)
Prominent Member
Joined: 17 years ago

OK hows this for a bit of help
http://www.eleccircuit.com/led-chaser-by-ic-4017-ic-555/
its the basic chaser i allways use, an its so easy to change to suit your needs, like i said i had 5 of these circuits in a box for my first year.
now if you know what lights your using DC or AC, dc is easer in my view.
then a little transistor could be used in replace of the Led's they use, so then you can run strings of leds off each channel.

Sparkey wrote:I really don't know anything about these components, other than a 555 is a timer chip, that's why I'm here. If you have some form of working example I might be able to learn from -- Please, tell me more.

Like I said in a previous post I'd like this to be a separate and stand alone board so it would be easy to hide within the display. So everything on just one board is what I'm looking for.

Thank you for your input.
Sparkey


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago
Sparkey wrote:
As this is the DIY site so yes, I'd like to make it myself. Not only is this the fun way but it is how I learn. So no, I do not want to buy something I want to enjoy this new hobby I have found. Again I appreciate the input, so don't take anything bad away from my reply, but for me it would be more fun spending my time on the project than spending the money. Also, if I get the darn thing to work I get neighborhood bragging rights!! WOO-WOO!

That's fine but its worth looking through my post closer. Two items in there are not off-the-self solutions, they are micro controllers (PicAXEand Parallax Propeller). These two items would allow you to quickly build your controller and share it with others but both require supporting electronics, and code.

What is PicAXE?


Reply
Posts: 150
Topic starter
(@sparkey)
Estimable Member
Joined: 19 years ago

Neat. I'd like to make this on a breadboard to play with it. Thanks!
The LEDs I plan on using are T1-3/4 (5mm) Max forward current 20mA continious, 5VDC Max reverse Voltage. 4VDC Forward voltage drop. 1" leads, Super Brights.

smartalec wrote:OK hows this for a bit of help
http://www.eleccircuit.com/led-chaser-by-ic-4017-ic-555/
its the basic chaser i allways use, an its so easy to change to suit your needs, like i said i had 5 of these circuits in a box for my first year.
now if you know what lights your using DC or AC, dc is easer in my view.
then a little transistor could be used in replace of the Led's they use, so then you can run strings of leds off each channel.

Reply
Posts: 150
Topic starter
(@sparkey)
Estimable Member
Joined: 19 years ago

Nothing is off limits here for suggestions on how to do this. After reading all the ideas it may turn out your suggestion is the best way. I'll read over the "what is picaxe" link. FYI I've been looking over the Arduino: http://www.arduino.cc/en/ to start learning more about micro controllers.

DynamoBen wrote:That's fine but its worth looking through my post closer. Two items in there are not off-the-self solutions, they are micro controllers (PicAXEand Parallax Propeller). These two items would allow you to quickly build your controller and share it with others but both require supporting electronics, and code.

What is PicAXE?


Reply
Page 3 / 4
Share: