Crazy Icicle light ...
 
Notifications
Clear all

Crazy Icicle light string idea

54 Posts
19 Users
0 Reactions
23.7 K Views
Posts: 577
(@photovor)
Honorable Member
Joined: 19 years ago

I've been down this road part-way, though only using red leds on a bread board, but I have a schematic and code for I believe 12 charlieplexed LEDs with PWM (fade out as it drops down) built for a 12F PIC. I wanted to attempt it this year, but never got the LEDs to make it work. I'd be more than happy to collaborate on the plan.


Reply
Posts: 972
(@dmoore)
Noble Member
Joined: 17 years ago
BillAd wrote:A local hotel has a Christmas tree decorated with about about a dozen 'snowfall light tubes'. These are strips of leds that simply cascade from top to bottom to look like falling snow. Each strand is independent such that the cascade is not synchronized with any of the others. The look was really nice and seems like it might be one application of the design discussed in this thread, although the control possible by Vixen could be quite an improvement.

A Christmas store in the area sells the snowfall light tubes on their internet site:

http://shop.christmascentral.com/Items/snowfall%20sf1000mm%205%20tubes?&caSKU=snowfall%20sf1000mm%205%20tubes&caTitle=Snowfall%20-%20Set%20of%205%20Single-Sided%2040%22%20LED%20Christmas%20Light%20Tubes

Here are some nice snowfall lights:

http://www.christmas-leds.com/category.aspx?categoryID=313


Reply
Posts: 859
(@smartalec)
Prominent Member
Joined: 17 years ago

the icle lights i got was in banks of 3 drops, 1drop 5lights, 2drop 4lights, 3drop 3lights,
an there was 10 channels on shorter sets an 12 channels on the longer sets.
i ended up tieing 4 sets to a 7channel chaser in 2004, running as my extended fence, total length was about 30-40meters i think off hand.


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
Photovor wrote:I've been down this road part-way, though only using red leds on a bread board, but I have a schematic and code for I believe 12 charlieplexed LEDs with PWM (fade out as it drops down) built for a 12F PIC. I wanted to attempt it this year, but never got the LEDs to make it work. I'd be more than happy to collaborate on the plan.

I am somewhat interested, although I'm not quite sure what my final direction will be. I'm wanting to do some extensive triks-like subsystems, but the physical characteristics of my applications are somewhat different than what the normal swetup would be. But if you already have some of the pieces of the puzzle figured out, that would be a head start!

don


Reply
Page 11 / 11
Share: