Crazy Icicle light ...
 
Notifications
Clear all

Crazy Icicle light string idea

54 Posts
19 Users
0 Reactions
23.7 K Views
Posts: 45
(@rsriverrat)
Trusted Member
Joined: 18 years ago

all this talk is kind of ironic, i was just talking with someone about using a triks to make a mega tree, most people use 16 strands of lights around their tree, so if one were to make 16 rows whicj would be the uprights with 48 leds spaced 3" apart you could get a 12' tall mega tree, use 4 different color leds and 4 triks and you could have a full 4 color mega tree. just put it all in some kind of clear plastic tube, maybe the kind that protects flourescent lights, that was gonna be my project for 2010 among a few others.

Ratt


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

Keep in mind that LEDTriks does not support dimming - only on/off so if that's OK for your Mega-Tree then it would be possible. It would also be very tough to sync up the LEDTriks to your sequence...


Reply
Posts: 597
(@entropy)
Honorable Member
Joined: 19 years ago
P. Short wrote:It looks very interesting.

I'm noodling around with the idea of using RGB LEDs with a small ($0.50) PIC on each light to do something similar (each LED would be independently dimmable). Obviously this would be somewhat more costly than what you're doing. I haven't given it much thought yet, but it might be more economical to use either a 7x6 or 9x8 charlie-plexed scheme with a small PIC for every few risers.

Did you look into using some sort of transparent or translucent tube (or channel) in place of the PVC tubing?

I've basically been toying with the same idea, using an ATTiny25 instead. They're unfortunately more expensive ($1.10/chip or so) than the PICs, however they're faster and have a hardware USI (kind of a midway between pure bit-banging I2C and a fullblown I2C slave in hardware). The $0.50 PICs seemed slower and didn't have any hardware I/O facilities. Plus I have no experience with them. An experienced PIC programmer probably could pull it off though. More on this after Christmas - I have 10 ATTiny85s on my Christmas gift list, and 50 10mm RGB LEDs on order from Evil Mad Scientist Labs - hopefully they arrive before I drive home to New Jersey!

Individual RGB PWM per node provides the easiest wiring. See mrpackethead's tree as an example - that wouldn't be possible with any multichannel driver solution.

For something like this, an NXP PCA9635 per "icicle" might do the trick. Someone commented "why have it when you still need the microcontroller to drive it" - You would only need one uC to drive multiple PCA9635s. So something like a 9635 for each 5-light RGB "icicle" (16 channels -> 5 RGB triplets with one spare) with a single uC controlling all of the 9635s in use.

If you don't mind the wiring challenge from hell, the Rainbowduino can control up to 192 individual LEDs in a charlieplexed matrix fashion (64 each of red, green, blue is the standard configuration, specifically it's designed for an 8x8 RGB matrix) with 4 bits/color dimming according to the documentation.

Edit: I was somewhat wrong about the Rainbowduino - it's a standard matrix driver, not charlieplexing.


Reply
Posts: 1062
 Ronp
(@ronp)
Noble Member
Joined: 19 years ago

The wiring is a nightmare.I think the problem I ran into was when you seperate the ledtriks pannel adding long wire between the leds the controll signal began to breakdown.
That and I did burn a trace on the ledtriks pcb during testing and had a few chips fail over all.
So I put this on the back burner for a wile.


Reply
Posts: 1062
 Ronp
(@ronp)
Noble Member
Joined: 19 years ago
rsriverrat wrote:all this talk is kind of ironic, i was just talking with someone about using a triks to make a mega tree, most people use 16 strands of lights around their tree, so if one were to make 16 rows whicj would be the uprights with 48 leds spaced 3" apart you could get a 12' tall mega tree, use 4 different color leds and 4 triks and you could have a full 4 color mega tree. just put it all in some kind of clear plastic tube, maybe the kind that protects flourescent lights, that was gonna be my project for 2010 among a few others.

Ratt

I did this test with a mini tree but the original plan was a mega

Good luck wiring it lol


Reply
Page 10 / 11
Share: