Another Ren64 Appro...
 
Notifications
Clear all

Another Ren64 Approach

28 Posts
10 Users
0 Reactions
10.5 K Views
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 20 years ago

Yes, just like the Ren-C + Grinch (or '595) combo. This combines the Ren-T, Ren-C and '595 on one board.


Reply
Posts: 317
(@dvc2013)
Reputable Member
Joined: 14 years ago

It looks like another great design Phil.

Will there be firmware for DMX as well as Renard ???


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 20 years ago

I'd have to see if there is enough processor bandwidth for that, as well how much interest there is in this.


Reply
Posts: 115
(@loveroflife96)
Estimable Member
Joined: 16 years ago

I'd be in for a couple if DMX firmware was a possibility.


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

That would be an odd shape for a case but if you loop it back after the first HC4094, the board will be almost square.

There’s plenty of movement for the HC4094, so juggling these should leave plenty of room for mounting holes. Most likely, none of these will match the existing locations of any case though.

Phil's board

Reply
Page 2 / 6
Share: