Peter I changed the LED order on my Scorpia PCB for RX and Frame Error to Led 3 for RX and Led 1 for Frame and connected R4 to pin 21 and R5 to pin 20 of the device to coincide with my setup so now I have HB led2, ZC led4, FE led1 and RX led3, this only becuse this is how I set my boards up from the start.
Update
For the last week or so I have been testing multiple combinations up to 216 channels at 57.6k baud and 115.2k baud using PIC16 and PIC18 devices using some 16 channel, 24 channel and 32 channel boards. I have also used some odd channel configurations as long as they are defined properly in Vixen they seem to work fine. The PIC727 now will run at 20 MHz using an external oscillator configured for 24 channels and the PIC18F4525 has been added to the list of acceptable processors that can be used for the Simple Renard series that is being generated. So at this point it looks like the following devices are working that I have tested PIC16F723, PIC16F727, PIC18F2221, PIC18F2420, PIC18F2620, PIC18F4520, PIC18F4525, PIC18F4620 and the PIC18F45K22. There are a few other devices that have been tested for the Simple Renard setups by PShort, scorpia, budude and LabRat. As time permits we will get a list together of the working PIC series of devices. As for the 32 channel device setup I still have not decided on the use of the 33rd channel to use for a status indicator, since I can use the TX port of the device to see if we have RX otherwise it would not transmit to the next PCB. ZC can come from the H11AA1, so the only other good choices we have are Framing error or Heartbeat, any suggestions would be helpful. Any suggestions before we finalize the code and PCB designs are welcome! I am now waiting on the new devices to arrive so we can start with the Simple Renard 64 which is an 80 pin TQFP device (PIC18F87K90) and hopefully that will be done within the next 2 months since most of the code is already working in Simulation mode using MPLAB.
awesome !
The PIC18F87K90 is going to have trouble directly driving 64 SSR inputs because of the limitations on sinking/sourcing current. Quite a few of the pins are good for only 2mA, and there is also a limit on the total sink current. So you're going to need some sort of buffers, I think, for some of the output pins.
P. Short wrote:The PIC18F87K90 is going to have trouble directly driving 64 SSR inputs because of the limitations on sinking/sourcing current. Quite a few of the pins are good for only 2mA, and there is also a limit on the total sink current. So you're going to need some sort of buffers, I think, for some of the output pins.
I will be using (8) 74HCT244N for the output buffers which will also protect the Processor outputs
Mactayl wrote:I will be using (8) 74HCT244N for the output buffers which will also protect the Processor outputs
For cost, and ease of soldering, would it be easier to use two of the 32 channel chips instead of 1 of the large chips? I know that we're trying to push the limits, but not all members (myself included) are probably able to handle this fine of a pitch.
chilloutdocdoc wrote:For cost, and ease of soldering, would it be easier to use two of the 32 channel chips instead of 1 of the large chips? I know that we're trying to push the limits, but not all members (myself included) are probably able to handle this fine of a pitch.
We could surely do that as one of the options, the reason I want to use the 80 TQFP are for extra channels that I want to use as inputs for triggering events for special optional functions.
Mactayl wrote:We could surely do that as one of the options, the reason I want to use the 80 TQFP are for extra channels that I want to use as inputs for triggering events for special optional functions.
Makes sense! Just ideas I had in my head as i was reading through.
chilloutdocdoc wrote:Makes sense! Just ideas I had in my head as i was reading through.
Just another bit of info the 80 pin TQFP is half the price of 2 PIC18F4620's
and the 74HCT244 are less then 25 cents each
Is there some OC-output part that you could use instead of the 244? That would be useful for people who want to drive some of the LED floods, etc, which use 12V or 24V.
