Way to go Phil!
What can I say but, awesome design!
Just so people know i will hopefully have a home etchable dip version of this board released this weekend so people can have a play.
It is basicly done i just have a couple of small questions regarding a couple of the changes phil made since the last version i was playing with. once they are clarified i will update and release the files and hopefully test code as well.
ok,
here is a test version designed for home etching. The PCB could be a bit neater but it would do for testing. should probably link 7,8 and 3 pins to each other on the comms side of things but that would add extra jumpers to the pcb.
slightly different pinouts on the triacs to phils board but thats something the code allows for.
here it is for people to comment on.
Peter
scorpia wrote:
slightly different pinouts on the triacs to phils board but thats something the code allows for.
I'm planning on splitting the source file into two parts to better support this sort of thing. One part will contain the firmware code that is expected to be the same across all designs, and the other file will have the declarations that are specific to a given PCB design. So the 'first' file would be the same for both my PCB design and scorpia's PCB design, but each of us would have their own 'second' file that has the declarations for our design.
ok, etched version is attached. i didnt get a chance to clean it up or drill it etc yet.
built the board , working enough to get a HB led and a ZC led working. havnt done any more testing
its to late to go outside to the show pc to do any channel tests so i thought i would post the built board.
oh and once i have confirmed i have a working version of code i will upload the eagle files.
Peter
Nice bit of straight cutting there!
They look good.
One question:
if you detect Zero Crossing with an Opto across your 12Vac won't the delay for actual zero crossing to detection be too long? Namely the diode Vf compared to 12vac represents about 1.2ms delay before switch on.
all i can say is it seems to work fine. the ZC looks to be about the same as the one i took pictures of for the ren-c when we were having issues with the flashing.
i am using a 9v ac plugpack atm on this board and it still looks good.
i will try and get a pic on the cro of ZC compared to the AC input and see if it looks like an issue.
but i think you would find that the renard SS boards would be worse if it was the case as they use about 6v ac on the opto.
Oh and yes, the cutting was a quick job one night when i was trying to get something to test with. pretty rough job with the dremmel sanding wheel 🙂
im hoping to loose another cm off the board length from the current design with a double sided board as well as also looking into the idea of stacking the boards to make an easy way to get more channels without all the costs.
another thought i had was to make a dc version with fets onboard . but atm its all just thoughts.
Good news is the firmware seems to be pretty good now. i would guess 98%. phil is a marvel at this stuff. i can only wish i had some of his talent when it comes to PIC coding. Im just hope i dont scare him off with all the stuff i keep adding to the requests list 🙂
Peter
My mistake,
TimW put me straight
Here will be about 2.3degree delay, no where what I observed.
Cheers
Matt
Ok , i have done some cleaning up of the board and some small layout changes so here is the latest versions.
i have added what i think were the latest working versions of the code. please remember this is beta so please test it yourself first.
If you have any questions about the code please post them here and hopefully we can make a manual on how to use this code. it is a little more to it than the earlier renard software.
Hopefully i will get a chance in the next few days to verify the code is the latest working files as i have my controller packed away since the move i did earlier in the month so i am unable to test it atm.
The pcb & Brd files are for eagle pcb v5.2. the code was made into a project using MPLAB v8.3 but should work in earlier versions i think.
Any other questions please feel free to ask.
I have created a project at mouser for this. the parts are untested but should work ok.
check http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=ccf4a92389
Note: i included a 20Mhz crystal and capacitors to the bom but atm they are not used.

